FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Charging Handles

Charging Handles

Grid List

Set Descending Direction

8 Item(s)

  1. Bren 805 Knurled Charging Handle
    $38.95

    The Bren 805 Knurled Charging handle projects out 1/4" farther than the OEM handle and has a 1/2" diameter knurled drum for good purchase, and  we have found this to be the perfect size to give a good grip without racking knuckles on the receiver yet the handle does not project out too far from the side of the gun.

    Just like the OEM handle the Knurled Charging Handle will work on both the left and right side of the gun and is a drop in replacement made 100% in the USA.

    Material: 8620 steel with heat treat

    Finish:  Black oxide

    Weight:  1.4 ounces

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More
  2. Scorpion EVO Fixed Extended Charging Handle
    $58.95

    The Fixed Extended Charging Handle projects out 1/2" more than the OEM CZ charging handle thus giving more to grab onto for charging the gun.Manufactured all in house by Manticore Arms the aluminum handle is pinned to a steel rod assembly. All surfaces are contoured to remove sharp edges and the handle is large enough to allow for an "HK slap" to charge the weapon.

    A common solution with this upgrade is to use the Fixed Extended Charging Handle on the typical charging side and move the OEM charging handle to the offhand side, giving the option to charge the gun from either side when required.

    PLEASE NOTE: When removing the OEM or a Manticore charging handle from the scorpion, you will need to depress the detent spring through the lock pin hole to to prevent the spring from being bent, mangled, or damaged. Manticore Arms does not warranty springs damaged from improper removal of the handle. If in doubt on how to remove a handle properly, please email us at info@manticorearms.com

    Material: 6061 aluminum and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight: 1.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. Scorpion EVO Switchback Charging Handle
    $82.95

    Based off the design of our incredibly popular and successful AUG Switchback and Tavor Switchback Charging Handles, the Scorpion EVO Switchback Charging Handle works in just the same way - fold out and pull back to charge the weapon and let go; the handle automatically returns to the folded position. It can even be locked into the holdback notch and given an "HK slap" and it will automatically go forward and fold.

    The best part is with the charging handle setup on the Scorpion EVO you can mount the Switchback Charging Handle on your primary charging side and mount your OEM handle on the off side, giving you dual charging ability on the gun.

    PLEASE NOTE: When removing the OEM or a Manticore charging handle from the scorpion, you will need to depress the detent spring through the lock pin hole to to prevent the spring from being bent, mangled, or damaged. Manticore Arms does not warranty springs damaged from improper removal of the handle. If in doubt on how to remove a handle properly, please email us at info@manticorearms.com

    PLEASE NOTE:   You are purchasing a single handle.  Photos show that two handles can be installed simultaneously and will work, but you have to order two handles to receive two handles.

    Material:  6061 aluminum and steel

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight:  1.2 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. Switchback Charging Handle

    Regular Price: $74.95

    Special Price $54.95

    The Switchback Charging Handle is an innovative design that is folded out, pulled back to charge the firearm,  and when released will automatically run itself forward and fold back into the storage position.  The allows for a handle with a large gripping area when charging the firearm while having a low snag free  profile when not needed.

    On the AUG the Switchback Charging Handle can be rotated upwards into the rear locking notch to hold the bolt open and then slapped downward with an "HK slap" to send it forward and home.  The contact surface of the charging handle is a removable and replaceable polymer pad to prevent wear on the valuable AUG receiver.  

    The Switchback is a drop in replacement for any Steyr AUG A2 or A3 charging handle, or the charging handle for all MSAR series of STG and E4 rifles with the smaller curved back charging handles.  The older rectangular charging handle with forward assist button such as that used on the STG-77 or AUG A1 model uses a different receiver mounting lug and the Switchback is not compatible with that model of AUG charging handle.

    The Standard model gives a "three finger" grip on the deployed charging handle.

    Material: 6061 aluminum  (and polymer for wear pad)

    Finish:  Type III Hardcoat Milspec Anodizing

    Weight: 1.5 ounces

    Length:  N/A

    Learn More
  5. Switchback Charging Handle MINI
    $74.95

    The Switchback Charging Handle is an innovative design that is folded out, pulled back to charge the firearm,  and when released will automatically run itself forward and fold back into the storage position.  The allows for a handle with a large gripping area when charging the firearm while having a low snag free  profile when not needed.

    On the AUG the Switchback Charging Handle can be rotated upwards into the rear locking notch to hold the bolt open and then slapped downward with an "HK slap" to send it forward and home.  The contact surface of the charging handle is a removable and replaceable polymer pad to prevent wear on the valuable AUG receiver.  

    The Switchback is a drop in replacement for any Steyr AUG A2 or A3 charging handle, or the charging handle for all MSAR series of STG and E4 rifles with the smaller curved back charging handles.  The older rectangular charging handle with forward assist button such as that used on the STG-77 or AUG A1 model uses a different receiver mounting lug and the Switchback is not compatible with that model of AUG charging handle.

    The Mini model gives a "two finger" grip on the deployed charging handle.

    Material: 6061 aluminum  (and polymer for wear pad)

    Finish:  Type III hardcoat milspec black anodizing

    Weight: 1.4 ounces 

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More
  6. Tavor Switchback Charging Handle
    $83.95

    Please note: The Tavor Switchback Charging Handle does not fit the X95.

    The Tavor Switchback is a folding charging handle that will work on either side of the Tavor. It offers the lowest possible profile when folded but a good two finger grip when deployed. The handle is folded out by hand, pulled back, and then released. The force of the handle going forward will cause it to flip forward, i.e. "switch back" to the stowage position and lock there via a spring loaded detent and small tab on the handle. The Tavor Switchbackconsists of an inner lug and rod assembly and an outer handle assemble which are attached by two screws and includes the componets, hardware, allen wrench, and instruction sheet necessary for installation. The Tavor Switchback not only can be mounted on either side of the Tavor but with a small modification to the inner plastic gas cover it is possible to run two handles on the rifle at the same time.

    Material: 6061 aluminum and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight: 3.4 ounces

    Length: N/A

    Designed and Manufactured 100% in the USA

    Learn More
  7. X95 Switchback Charging Handle
    $83.95

    Please note: The X95 Switchback Charging Handle does not fit the Tavor SAR.

    Please Note:  You may see some coesmetic burnishing of the polymer where the charging handle rides on the slot.  This is completely normal, willnot harm the rifle, and also happens with the OEM charging handle.  I fyou are not comfortable with this cosmetic burnishing please do not purchase this product.

    The X95 Switchback is a folding charging handle that will work on either side of the X95. It offers the lowest possible profile when folded but a good two finger grip when deployed. The handle is folded out by hand, pulled back comfortably, and then released. The force of the handle going forward will cause it to flip forward, i.e. "switch back" to the stowage position and lock there via a spring loaded detent and small tab on the handle.  A 45 degree front face allows you to sweep the hand back to "find" the handle and deploy and pullin one single, smooth motion.

    The X95 Switchback is made in the USA of 6061 aluminum that is anodized black, and consists of a folding handle and lug with a steel rod, all of which are preassembled. The X95  Switchback not only can be mounted on either side of the X95 but with a small modification to the inner plastic gas cover it is possible to run two handles on the rifle at the same time.

    The X95 Switchback will work with both the OEM forends (both 16" and 13" SBR length) and with the Manticore X95 Cantilever Forend.

    Material:  6061 aluminum handle and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight:  2.5  ounces

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More
  8. Raptor Charging Handle
    $17.95

    Out of stock

    The Raptor Charging Handle was developed as a specific solution for those who do not like the standard charging handle on the Steyr AUG and MSAR series of rifles. The handle projects out horizontally which allows for a more natural, ergonomic grip and is sized for two fingers to grip the handle comfortably. The Raptor has no sharp edges or ridges and is lightly textured. The horizontal design of the handle allows for clearance of bulky optics such as the Eotech when mounted on both the standard height and even lower height  top rails, and will prevent the dreaded "bloody knuckle" encounter with the side of the optic when charging the rifle in a hurry or under pressure.

    Material:  Polymer

    Finish: Black with light texture

    Weight:  0.8 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

8 Item(s)