FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Muzzle Devices

Muzzle Devices

Grid List

Set Ascending Direction

1-10 of 20

Page:
  1. 1
  2. 2
  1. Yugo Krinkov NightBrake 26mm
    $64.95

    Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms Yugo M92 NightBrake muzzle compensator is designed specifically for the 26x1.5 left hand thread found on the muzzle of the Yugoslavian M92 and M85 Krinkov rifles and PAP series of pistols. The NightBrake is designed to reduce felt recoil, virtually eliminate muzzle rise, and can safely pass any projectile up to 0.311" (0.30 caliber) in diameter, making it a universal muzzle device for both the M85 and M92. A total of eighteen ports distributed around the upper 270-degree arc of the device help stabilize and reduce exiting gas pressure, and the lower 90-degree arc has no ports to prevent a dust signature when fired.

    The Yugo M92 NightBrake flash hider is 2.125 inches long, adding only 1.125 inches to the overall length of the rifle- it is over an inch shorter than the standard M92 muzzle booster. In addition the weight is only 3.0 ounces, and it is marked "MANTICORE" to denote a U.S. made part that counts towards 922r compliance.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  2.7 ounces

    Length:  2.125 inches

    100% designed and manfuactured in the USA

    Learn More
  2. Yugo Front Detent Kit (for Yugo M92 and M85 PAP)
    $12.95

    You may have discovered when removing the thread protector collar on your Yugo PAP pistol that there isn’t a front sight detent pin to hold your muzzle device in place. This part is the correct replacement for that missing pin.

    Manufactured from 4140 steel with a black oxide finish, the Yugo Front Detent Kit includes the detent pin, a spring, and a roll pin. Simply place the spring on the back of the detent pin, insert in the hole located in the front sight base, push in slightly against the spring pressure and tap in the roll pin. The Yugo Front Detent Kit is manufactured here in the U.S.A. and is the perfect addition to the Yugo M92 NightShroud or Yugo M92 NightBrake.

    Material:  4140 steel

    Finish:  Black oxide

    Weight:

    Length:  N/A

    Learn More
  3. Shadow Flash Hider 1/2 x 28 tpi
    $43.95

    The Shadow Flash Hider is a more compact and economical version of the Eclipse flash hider that features three short, straight prongs for excellent flash hiding capability. The Shadow Flash Hider will clear any round up to 9mm in diameter (i.e. 300 Blackout, 5.56mm, .22LR, etc) and is threaded 1/2 x 28 tpi. It is marked "MA" and "9mm" to denote that it is a 922r compliant part made in the USA by Manticore Arms for any weapon up to 9mm caliber and comes with a crush washer.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.4 ounces

    Length: 1.75 inches

    100% designed and manufactured in the USA

    Learn More
  4. Scorpion EVO Tri-Lug Adapter
    $49.95

    Developed specifically for the Scorpion EVO this model of the Eclipse has 18mm threads the Scorpion EVO Tri-Lug adapter mounts securely to the barrel with a 13/16" wrench (torque to approximately 25 ft lbs) and allows for mounting of all Tri-Lug accessories such as flash hiders and suppressors. The Scorpion EVO Tri-Lug Adapter is marked MA USA to denote a U.S. made part that counts towards 922r compliance.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.0 ounces

    Length: 2.4 inches

    100% designed and manufactured in the USA

    Learn More
  5. Reverb Muzzle Brake 1/2 x 28 tpi
    $43.95

    The Reverb Muzzle Brake is a compact muzzle compensator that will work with any round under 9mm in diameter (i.e. 300 Blackout, 5.56mm, etc) on 1/2 x 28 tpi threaded barrels.

    Learn More
  6. NightBrake for 5/8x24 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 5/8 x 24 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  7. NightBrake for 24mm
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one. A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature. The Nightbrake is threaded 24mm and will clear any projectile up to 0.311 caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part. The 24 mm threaded Nightbrake has a multiple detent notches to allow it to be threaded down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.2 ounces

    Length: 2.5 inches

    Learn More
  8. NightBrake for 1/2x28 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 1/2 x 28 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  9. Eclipse Flash Hider for Yugo Krinkov
    $64.95

    Designed specifically for the .308 and 7.62 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions. The device is threaded 26.5 x 1 for the unusual threads of the Yugo M85 and M92 PAP "krinkov" style pistols and rifles, and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers. The Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to thread down as far as possible on the muzzle.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  10. Eclipse Flash Hider 5/8x24 tpi
    $64.95

    Designed specifically for the .308 and 7.62mm caliber cartridge the 5/8 x 24 tpi Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 5/8 x 24 tpi and will clear any projectile up to .308  caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Ascending Direction

1-10 of 20

Page:
  1. 1
  2. 2