FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Muzzle Devices

Muzzle Devices

Grid List

Set Descending Direction

1-10 of 20

Page:
  1. 1
  2. 2
  1. Afterburner Flash Hider Tip
    $28.95

    Tailor the performance of your Afterburner Linear Compensator to your exact needs with our thread-on muzzle tips. The Afterburner Flash Hider Tip adds only 1 ounce and 0.625 inches of length to the Afterburner Linear Compensator, amd dials it in to reduce flash signature. The tip installs via the internal threads in the front of the Afterburner.  No thread locker or washers are necessary to install the tip, just thread it in snugly and it is secure.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  1.0 ounces

    Length:  0.625"  past face of Afterburner Muzzle

    100% designed and manufactured in the USA

    Learn More
  2. Afterburner Linear Compensator 1/2x28 tpi
    $43.95

    The Afterburner Linear Compensator is one of the slimmest linear compensators on the market, yet is designed to give the same performance of larger "fatty" linear comps made by other companies. Measuring 1.00 inches in diameter and 2.25 inches in length with a 1.80 inch long inner chamber, the Afterburner features internal threading which serves dual purposes: distributing gas flow to reduce flash and provide a threaded surface where optional threaded muzzle ends, such as flash hider and compensator tips, can be added on for additional effect. The Afterburner will fit inside the Manticore Arms AR-15 Transformer Forend. The Afterburner Linear Compensator is marked "MA" and "USA" to denote 922r compliance and includes a crush washer and has wrench flats for ease of installation

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.4 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  3. Eclipse Flash Hider 1/2x28 tpi
    $64.95

    Designed specifically for the .223 and 5.56 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 1/2 x 28 tpi and will clear any projectile up to .223 caliber and 5.56 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "223" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  4. Eclipse Flash Hider 1/2x28 tpi parkerized CONTRACT OVERRUN
    $49.95

    Designed specifically for the .223 and 5.56 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 1/2 x 28 tpi and will clear any projectile up to .223 caliber and 5.56 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "223" and can have a HK retainer spring installed (not included) to retain on the spines on typical HK style barrels.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  parkerized

    Weight: 3.6 ounces

    Length: 2.25 inches

    Designed and Manufactured 100% in the USA

    Learn More
  5. Eclipse Flash Hider 14x1L
    $64.95

    Designed specifically for the 308 and 7.62 mm caliber cartridge the 14 x 1 L Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 14 x 1 L metric  and will clear any projectile up to 311 caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.  Use the crush washer instead of the detent pin for installation (detent pin may be left in place)

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  6. Eclipse Flash Hider 24mm
    $64.95

    Designed specifically for the 308  and 7.62 mm caliber cartridge the 24 mm Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 24mm  and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers.  The 24 mm Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to allow it to thread down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  7. Eclipse Flash Hider 5/8x24 tpi
    $64.95

    Designed specifically for the .308 and 7.62mm caliber cartridge the 5/8 x 24 tpi Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 5/8 x 24 tpi and will clear any projectile up to .308  caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  8. NightBrake for 1/2x28 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 1/2 x 28 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  9. NightBrake for 14x1L
    $64.95

    With the same excellent performance as the original NightBrake, the new 14x1L threaded version features a single detent notch to time properly and wrench flats for those stubborn barrels. An included high temperature silicone washer eliminates rattle and keeps the device perfectly aligned when mounted.

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 14 x 1 L  and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  The 14 x 1 L threaded Nightbrake has a single detent notch and includes a high temperature silicone washer to prevent rattle when installed.  The muzzle device can be installed without the washer and will still function with no issues.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  10. NightBrake for 24mm
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one. A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature. The Nightbrake is threaded 24mm and will clear any projectile up to 0.311 caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part. The 24 mm threaded Nightbrake has a multiple detent notches to allow it to be threaded down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.2 ounces

    Length: 2.5 inches

    Learn More

Grid List

Set Descending Direction

1-10 of 20

Page:
  1. 1
  2. 2