FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Ascending Direction

11-20 of 77

  1. Tavor Gasketed Port Cover
    $47.95

    (The Gasketed Port Cover will work on both the Tavor and X95 Tavor)

    The Tavor Gasketed Port Cover uses the unique solution of a compressible gasket to stop gas leakage through the ejection port cover and is ideal for use when running a suppressor. An inner and outer panel are pulled together by two screws and the gasket is sandwiched and compressed between the two panels which causes it to expand and fill in every gap and thus guarantee a gas tight seal regardless of irregularity in the surfaces to be sealed.  The Gasketed Port cover is will work on both the left and right side ejection ports of the Tavor SAR and X95 and has an integral QD pocket for a sling mounting point.  All hardware, tools, and instructions are included for installation.

    Material: 6061 aluminum and rubber like polymer

    Finish:  Type III milspec hardcoat black anodizing, black finish on rubber like polymer

    Weight: 1.7 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  2. Tavor Curved Buttpad
    $72.95

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE "ORIGINAL" TAVOR (SAR MODEL) AND WILL NOT FIT THE X95

    Due to the large number of people who accidentally order this pad for their X95, if you order this for your X95 and want to return, you will have to return this buttpad for a refund on the price of it and re-order the correct one for the X95.   We will no longer do a "swap"  as we keep losing money on shipping from people do not reading the note above.

    The Tavor Curved Buttpad solves the length of pull and shouldering issues many people have with the existing Tavor rifle and buttpad.

    Manufactured from 6061 T6 aluminum and a specially chosen chemically resistant polymer with just a bit of "give" to it, the Tavor Curved Buttapd reduces the length of pull by almost an inch, and allows you to easily roll and lock the gun right into the shoulder pocket. Ribbing on the back and the texture of the polymer guarantee the gun will not slip around in the shoulder pocket once mounted. The special curved shape reduces the length of pull while keeping the overall length of the weapon the same as with the existing buttpad, which means that the gun stays just over 26" and there are no NFA issues.

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 5.3 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. Tavor 7 Curved Buttpad
    $72.95

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE  TAVOR 7.  IT WILL NOT FIT THE TAVOR SAR OR TAVOR X95

    Similar to our Tavor Curved Buttpad, the tAVOR 7 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad.  The rubber pad is curved to conform to the shoulder and gives both better ergonomics and a better grip so the rifle does not slide around.

    The tavor 7 Curved Buttpad is made by Manticore Arms in the USA.

     Please be sure to order the correct buttpad for your rifle, and if not sure please contact customer service at info@manticorearms.com

     

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 6.5 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. Talon Scope Mount for AUG A3
    $225.00

    Please Note: The Talon Scope Mount for the AUG A3 does not fit the AUG A3 M1; the correct item for the AUG A3 M1 is SKU MA-8240. Neither scope mount will fit the MSAR.

    The Talon Scope Mount for AUG A3 allows for mounting of a 30mm scope (or one inch scope with rings spacers, not included) on the Steyr AUG A3 and gives the look of the original AUG A1 with integral scope, but with more modern optics. An integral QD pocket is machined into the front of the scope mount to replace the one on the removed top rail. The mount includes the mount base, two ring tops, mounting hardware, and instruction sheet.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.7 ounces

    Length: N/A

    100% designed and manfuactured in the USA

    Learn More
  5. Shadow Flash Hider 18mm Scorpion EVO
    $49.95

    Developed specifically for the Scorpion EVO this model of Shadow has 18mm threads, and three shorter straight prongs make the device more compact while still giving plenty of flash suppression for the 9mm cartridge.  Six detent notches allow the muzzle device to thread down as much as possible, and the device is marked "MA USA"  to denote USA manufacture for 922r compliance.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.0 ounces

    Length:1.75 inches

    Designed and Manufactured 100% in the USA

    Learn More
  6. Shadow Flash Hider 1/2 x 28 tpi
    $43.95

    The Shadow Flash Hider is a more compact and economical version of the Eclipse flash hider that features three short, straight prongs for excellent flash hiding capability. The Shadow Flash Hider will clear any round up to 9mm in diameter (i.e. 300 Blackout, 5.56mm, .22LR, etc) and is threaded 1/2 x 28 tpi. It is marked "MA" and "9mm" to denote that it is a 922r compliant part made in the USA by Manticore Arms for any weapon up to 9mm caliber and comes with a crush washer.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.4 ounces

    Length: 1.75 inches

    100% designed and manufactured in the USA

    Learn More
  7. Scorpion EVO Switchback Charging Handle
    $82.95

    Based off the design of our incredibly popular and successful AUG Switchback and Tavor Switchback Charging Handles, the Scorpion EVO Switchback Charging Handle works in just the same way - fold out and pull back to charge the weapon and let go; the handle automatically returns to the folded position. It can even be locked into the holdback notch and given an "HK slap" and it will automatically go forward and fold.

    The best part is with the charging handle setup on the Scorpion EVO you can mount the Switchback Charging Handle on your primary charging side and mount your OEM handle on the off side, giving you dual charging ability on the gun.

    PLEASE NOTE: When removing the OEM or a Manticore charging handle from the scorpion, you will need to depress the detent spring through the lock pin hole to to prevent the spring from being bent, mangled, or damaged. Manticore Arms does not warranty springs damaged from improper removal of the handle. If in doubt on how to remove a handle properly, please email us at info@manticorearms.com

    PLEASE NOTE:   You are purchasing a single handle.  Photos show that two handles can be installed simultaneously and will work, but you have to order two handles to receive two handles.

    Material:  6061 aluminum and steel

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight:  1.2 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  8. Scorpion EVO Slider Stock Buttpad
    $20.00

    The Scorpion EVO Slider Stock Buttpad screws in via two supplied screws to the back of the Manticore Arms Scorpion EVO Slider Stock. This 1/2" thick internally reinforced buttpad will increase the length of pull and add a comfortable no-slip grip to the Slider Stock.

    Material:  Rubber like polymer with internal reinforcement

    Finish:  Black

    Weight: ?? ounces

    Length:  Adds 0.5" of length to Slider Stock

    100% designed and manufactured in the USA

    Learn More
  9. Scorpion EVO Fixed Extended Charging Handle
    $58.95

    The Fixed Extended Charging Handle projects out 1/2" more than the OEM CZ charging handle thus giving more to grab onto for charging the gun.Manufactured all in house by Manticore Arms the aluminum handle is pinned to a steel rod assembly. All surfaces are contoured to remove sharp edges and the handle is large enough to allow for an "HK slap" to charge the weapon.

    A common solution with this upgrade is to use the Fixed Extended Charging Handle on the typical charging side and move the OEM charging handle to the offhand side, giving the option to charge the gun from either side when required.

    PLEASE NOTE: When removing the OEM or a Manticore charging handle from the scorpion, you will need to depress the detent spring through the lock pin hole to to prevent the spring from being bent, mangled, or damaged. Manticore Arms does not warranty springs damaged from improper removal of the handle. If in doubt on how to remove a handle properly, please email us at info@manticorearms.com

    Material: 6061 aluminum and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight: 1.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  10. Scorpion EVO E3 Safety Lever
    $24.95

    The Scorpion EVO E3 Safety (Enhanced Ergonomic EVO Safety) for is a direct drop in metal safety upgrade available for both the left and right side of the gun. Careful design of the shape, size, and location of the E3 prevents it from touching or rubbing on the index finger, and even if it does, it will not poke and gouge like the OEM safety lever. In addition the safety has been specifically designed to work with the OEM folding stock and Manticore's slider stock for the Scorpion EVO.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight:  0.2 ounces

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Ascending Direction

11-20 of 77