FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

1-10 of 81

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. 15"  MLOK Rail for AR-15
    $164.95

    Specifications:

    • AR-15 Aluminum Free Float rail system with M-LOK slots on sides and underside, picatinny on top.

    • Dimensions: 15” length, 1.5” exterior width, 1.09” interior clear width

    • Weight: 8.4 ounces for rail, 1.5 ounces for barrel nut

    • Weight installed: 9.9 ounces (only adds 7.4 ounces as original barrel nut is removed)

    • Barrel nut material and finish: 6061 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Rail material and finish: 6061 T6 aluminum with  Milspec Type III Black hardcoat anodizing

    • Panel material and finish: 6061 black anodized aluminum and proprietary polymer 

    • Ships with M-LOK Rail, Barrel Nut, Barrel Nut Wrench, all hardware, allen wrenches, and instruction sheet

    • The Manticore GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look!

    • Clears low profile gas blocks and works with all gas system lengths (carbine, midlength, rifle)

    • 100% Designed and Made in the USA

    Learn More
  2. 3X QD Sling Mount Picatinny
    $25.95

    The 3X QD Sling Mount (Picatinny)  provides a simple yet very durable mounting point for QD pockets on and picatinny rail, and allows for mounting QD sling swivels in three different positions. Ideal for use on top of a rail system to give left, right, and to mounting options, it will mount to any picatinny surface giving you a host of flexibility for setting up a sling. The 3X QD Sling Mount (Picatinny) is made of black anodized 6061 aluminum, mounts and secures with a crossbolt, and is 100% made in the USA.

    Material:  6061 aluminum  

    Finish:  Type III hardcoat milspec black anodizing   

    Weight:  0.8 ounces   

    Length:  N/A   

    100% designed and manufactured in the USA

    Learn More
  3. Afterburner Flash Hider Tip
    $28.95

    Tailor the performance of your Afterburner Linear Compensator to your exact needs with our thread-on muzzle tips. The Afterburner Flash Hider Tip adds only 1 ounce and 0.625 inches of length to the Afterburner Linear Compensator, and dials it in to reduce flash signature. The tip installs via the internal threads in the front of the Afterburner.  No thread locker or washers are necessary to install the tip, just thread it in snugly and it is secure.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  1.0 ounces

    Length:  0.625"  past face of Afterburner Muzzle

    100% designed and manufactured in the USA

    Learn More
  4. Afterburner Linear Compensator 1/2x28 tpi
    $43.95

    The Afterburner Linear Compensator is one of the slimmest linear compensators on the market, yet is designed to give the same performance of larger "fatty" linear comps made by other companies. Measuring 1.00 inches in diameter and 2.25 inches in length with a 1.80 inch long inner chamber, the Afterburner features internal threading which serves dual purposes: distributing gas flow to reduce flash and provide a threaded surface where optional threaded muzzle ends, such as flash hider and compensator tips, can be added on for additional effect. The Afterburner will fit inside the Manticore Arms AR-15 Transformer Forend. The Afterburner Linear Compensator is marked "MA" and "USA" to denote 922r compliance and includes a crush washer and has wrench flats for ease of installation

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.4 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  5. Afterburner Muzzle Comp Tip
    $28.95

    Tailor the performance of your Afterburner Linear Compensator to your exact needs with our thread-on muzzle tips. The Afterburner Muzzle Comp Tip (aka "the rocket pod" as we call it in the shop) adds only 1 ounce and 0.625" inches of length to the Afterburner Linear Compensator and dials it in to reduce felt recoil.The tip installs via the internal threads in the front of the Afterburner.  No thread locker or washers are necessary to install the tip, just thread it in snugly and it is secure.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  1.0 ounces

    Length:  0.625"  past face of Afterburner Muzzle

    100% designed and manufactured in the USA

    Learn More
  6. ALFA RAIL Keymod Forend for stamped AK
    $118.95

    PLEASE NOTE: THE ALFA LOWER FOREND OPTION FOR $119 IS ONLY THE LOWER PORTION, THE UPPER HANDGARD IS NOT INCLUDED WITH THIS OPTION! THE MA-11275 ALFA HANDGUARD WILL ONLY FIT STANDARD STAMPED 'EURO' AND 'CHINESE' AK'S.

    THIS MODEL WILL NOT FIT YUGO M-70/N-PAP/O-PAP, KRINKOVS, M92'S, UNCONVENRTED VEPR'S OR UNCONVERTED SAIGAS.

    The ALFA RAIL Keymod forend for the standard pattern AK gives the look and feel of a more traditional AK forend while giving the ability to mount Keymod accessories and other optional components, all while mounting exactly like the original handguard.

    The forend is simply installed like any standard AK handguard and is held in place by the front handguard retainer. An extremely precise and tight fight, in addition to careful design of the interface points with weapon ensures that the mounting is rock solid.

    Weighing 3.5 ounces it is actually almost an ounce lighter than the original polymer forend, yet several times stronger. An optional Superlow Optics Mount Upper which weighs only 2 ounces allows you to mount an Aimpoint Micro on its picatinny top rail and have co-witness with the iron sights.

    The ALFA RAIL lower forend will work with the standard polymer or wood upper handguard, or even with an Ultimak railed upper gas tube. Manufactured from solid billets of 6061 T6 aluminum and anodized black the ALFA RAIL upper and lower include instructions and all hardware necessary for installation and are 100% made in the USA.

    Material: 6061 aluminum

    Finish: Type III Milspec Hardcoat Black Anodizing

    Weight: 3.5 ounces lower rail, 2.0 ounces optional top cover

    Length: Standard AK forend

    100% designed and manufactured in the USA.

    Learn More
  7. ARClight Tavor Light Ring
    $35.95

    The Light Ring allows for mounting of a 1" light in the lower front of the ARClight Tavor Forend and ARClight Tavor XTL forend. In addition, the design of the Light Ring also acts as a cover plate for the front of the forend system. Pair it up with the IPSM Big Button on an ARClight XTL for the ultimate light mounting setup on a Tavor.

    The XTL model comes with the Light Ring and a top Filler Plate to completely seal the larger forend profile of the XTL forend when the Light Ring is installed in the front position.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: ?? ounces

    Length: N/A

    Designed and Manufactured 100% in the USA

    Learn More
  8. Brass Buster brass deflector
    $17.95

    The Brass Buster is designed as a removable and ambidextrous polymer brass deflector to allow weak side shooting with the Steyr AUG and Steyr AUG clones.  Simply press the Brass Buster down onto the stock behind the ejection port with the projection on the ejection port side.  Regardless of if your ejection port is on the left or right side of the gun the Brass Buster can be installed.

    The Brass Buster is compatible with all Steyr Aug, MSAR STG-556 (all generations) and E4, and all TPD AXR series rifle, and includes the brass deflector and an instruction sheet.

    Material:  Polymer

    Finish:  Black with very light texture

    Weight:  1.0

    Length:  N/A

    Learn More
  9. Bren 2 Picatinny Mounting Block
    $104.95

    The Bren 2 Picatinny Mounting Block allows for mounting of picatinny style stocks, arm braces, and accessories of all sorts on the butt of the Bren 2 and Bren 2 MS rifles and pistols.

    The block is pre-assembled and is easily installed by simply pulling the front pin on the lower, tilting out and removing, then removing the existing mounting block, and sliding the Bren 2 Picatinny Mounting Block upwards and into place where it will secure itself with a "click" (make sure the recoil spring assembly is all the way in the gun before pressing upwards on the block). Removal is just as simple, pull back a small spring loaded lever on the underside, slide the block down and it will come right off.  The spring loaded locking piece keeps it snugly on the the gun with no movement, and makes installation and removal extremely easy with no tools.

    Material:  6061 aluminum

    Finish:  Type III milspec black anodizing

    Weight: 5.8 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  10. Bren 2 Sidefolder Mounting Block
    $104.95

    The Bren 2 Picatinny Mounting Block allows for mounting of sidefolder stocks, arm braces, on the Bren 2 and Bren 2 MS rifles and pistols.  The block is designed to work with the standard SB Tactical sidefolding arm braces, and will also work with B&T sidefolder stocks if the hinge pin hole is drilled out to 3/16" (0.188").  Other stocks and arm braces may work if set up with a similar hinge pin and button dimensions.

    The block is pre-assembled and is easily installed by simply pulling the front pin on the lower, tilting out and removing, then removing the existing mounting block, and sliding the Bren 2 Picatinny Mounting Block upwards and into place where it will secure itself with a "click" (make sure the recoil spring assembly is all the way in the gun before pressing upwards on the block). Removal is just as simple, pull back a small spring loaded lever on the underside, slide the block down and it will come right off.  The spring loaded locking piece keeps it snugly on the the gun with no movement, and makes installation and removal extremely easy with no tools.

    To install a stock or arm brace, drill out the hinge pin hole to 3/16" (0.188").  SB Tactical arm braces usually will be a bit snug but should with the hole in them being approximately 0.180".  It is recommended to put a bit of white lithium grease on the included 2" long  partially threaded 10-32 socket head screw.  Lock the stock or arm brace into position as though deployed, and align the hinge pin hole, then turn the screw down through the hole until the head is completely set in its pocket.  If the stock is too snug to fold, back off the screw 1/4 to 1/2 turn, and if it is a little loose, give it another 1/4 to 1/2 turn.  The preferred friction lock in the folded position can be adjusted this way.

    NOTE:  Due to the length of the receiver length and trigger location on the Bren 2 the SB Tactical SBT arm brace will have a 14.0" length of pull when deployed.  As of this time (12/02/2020) ATF has not officially or  publicly published any guidelines on allowable length of pull for deployed arm braces.  Manticore Arms cannot provide legal advice on the assembly or use of products.  

    Material:  6061 aluminum

    Finish:  Type III milspec black anodizing

    Weight: 6.0 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

1-10 of 81

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5