FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

11-20 of 79

  1. ARClight Tavor Forend
    $125.00

    Please note, the ARClight Tavor Forend fits the Tavor SAR and is not compatible with the X95.

    The ARClight Tavor Forend is a direct replacement for the standard Tavor SAR polymer forend, and features ARC LOK slots that allow for attachment of Manticore Arms ARC LOK rail segments (sold separately) or the attachment of Magpul MOE compatible accessories. The ARClight Tavor Forend weighs 2 ounces less than the OEM polymer forend, and gives more mounting options and greater strength all with less weight.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 4.0 ounces

    Length: ?? inches

    Designed and Manufactured 100% in the USA

    Learn More
  2. ARClight Tavor Light Ring
    $35.95

    The Light Ring allows for mounting of a 1" light in the lower front of the ARClight Tavor Forend and ARClight Tavor XTL forend. In addition, the design of the Light Ring also acts as a cover plate for the front of the forend system. Pair it up with the IPSM Big Button on an ARClight XTL for the ultimate light mounting setup on a Tavor.

    The XTL model comes with the Light Ring and a top Filler Plate to completely seal the larger forend profile of the XTL forend when the Light Ring is installed in the front position.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: ?? ounces

    Length: N/A

    Designed and Manufactured 100% in the USA

    Learn More
  3. ARClight XTL IPSM "BIG BUTTON"
    $30.95

    The IPSM Big Button for ARClight XTL allows the pressure switch of the flashlight to be mounted internally in the forend while still being operated from the outside.  This is accomplished by the pressure swtich being mounting internally by an aluminum backer plate and a rubber button being mounted externally that can be pressed to activate the now internal pressure switch.  This keeps the pressure switch and cord inside the forend safe and free from snags and damage.

    The kit and pressure switch can be mounted on the left or right sides of the forend to offer more flexibility in position.  The IPSM kit includes the rubber big button, aluminum backing plate, adjustment screws, and instruction sheet and is 100% made in the USA.

    Material:  6061 aluminum and rubber

    FInish:  Type III Hardcoat Mislpec Anodizing

    Weight: 1.0 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. ARClight XTL Tavor Forend
    $180.95

    Please note, the ARClight XTL Tavor Forend fits the Tavor SAR and is not compatible with the X95.

    ARClight XTL Tavor Forend is a direct replacement for the standard Tavor polymer forend. Even better, the ARClight XTL is 3 inches longer than the existing forend, thus allowing additional mounting space for accessories and a grip further out on the gun, including on top of the front of the forend. It is made of completely monolithic construction, with no welds or fasteners that can fail!

    The ARClight XTL not only allows for additional mounting space, but also will allow for mounting of a standard 1" flashlight on both 16.5" and 18" barreled Tavors. and will also sleeve over any suppressor 1.75" in diameter or smaller.The forend also features two integrally machined QD sling swivel pockets on each side, and slots at the rear underside for wire routing for those who wish to place their pressure or tape switches on the outside or mount it on a vertical foregrip under the forearm.

    Naked is just the forend, nothing else.

    Fully Loaded is the forend, Light Ring, and (1) 5 slot and (1) 11 slot rail segment.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 8.1 ounces forend, 1.9 ounces light ring

    Length: 8.5 inches overall, projects 3 forward from face of upper receiver 

    100% designed and manufactured in the USA

    Learn More
  5. Brass Buster brass deflector
    $17.95

    The Brass Buster is designed as a removable and ambidextrous polymer brass deflector to allow weak side shooting with the Steyr AUG and Steyr AUG clones.  Simply press the Brass Buster down onto the stock behind the ejection port with the projection on the ejection port side.  Regardless of if your ejection port is on the left or right side of the gun the Brass Buster can be installed.

    The Brass Buster is compatible with all Steyr Aug, MSAR STG-556 (all generations) and E4, and all TPD AXR series rifle, and includes the brass deflector and an instruction sheet.

    Material:  Polymer

    Finish:  Black with very light texture

    Weight:  1.0

    Length:  N/A

    Learn More
  6. Bren 805 Knurled Charging Handle
    $38.95

    The Bren 805 Knurled Charging handle projects out 1/4" farther than the OEM handle and has a 1/2" diameter knurled drum for good purchase, and  we have found this to be the perfect size to give a good grip without racking knuckles on the receiver yet the handle does not project out too far from the side of the gun.

    Just like the OEM handle the Knurled Charging Handle will work on both the left and right side of the gun and is a drop in replacement made 100% in the USA.

    Material: 8620 steel with heat treat

    Finish:  Black oxide

    Weight:  1.4 ounces

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More
  7. Bren 805 M-LOK Forend
    $79.95

    Machined from solid aluminum billet the Bren 805 M-LOK Forend allows for removal of the uncomfortable pictanny underside rail and replaces it with a nicely contoured underside forend with M-LOK slots on three faces.  It is a direct drop in replacement for the picatinny underside rail and only takes a few minutes to install and at 3.2 ounces only weighs slightly more than the stock 2.5 ounce component.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 3.3 ounces

    Length: 7.25 inches

    Designed and Manufactured 100% in the USA

    Learn More
  8. Bren 805 Safety
    $33.95

    With smoothed out edges and profile and a slightly longer length to reduce the force needed to operate, the Bren 805 Enhanced Safety makes it just that much better to run your Bren 805. Made of 6061 aluminum and black anodized right here in the USA, The Bren 805 Enhanced safety is available for both the left and right hand sides of the gun (each side of the Bren 805 uses a slightly different assembly).

    Please note that due to the inherent design of the Bren 805 trigger mechanism and safety lever shaft the installation can take a little time and patience but the end result will totally be worth the effort.

    Material:  6061 aluminum

    Finish:  Type III milspec black anodizing

    Weight: 0.2 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  9. Eclipse Flash Hider 1/2x28 tpi parkerized CONTRACT OVERRUN
    $49.95

    Designed specifically for the .223 and 5.56 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 1/2 x 28 tpi and will clear any projectile up to .223 caliber and 5.56 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "223" and can have a HK retainer spring installed (not included) to retain on the spines on typical HK style barrels.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  parkerized

    Weight: 3.6 ounces

    Length: 2.25 inches

    Designed and Manufactured 100% in the USA

    Learn More
  10. Eclipse Flash Hider 14x1L
    $64.95

    Designed specifically for the 308 and 7.62 mm caliber cartridge the 14 x 1 L Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 14 x 1 L metric  and will clear any projectile up to 311 caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.  Use the crush washer instead of the detent pin for installation (detent pin may be left in place)

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

11-20 of 79