FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

21-30 of 75

  1. Eclipse Flash Hider for Yugo Krinkov
    $64.95

    Designed specifically for the .308 and 7.62 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions. The device is threaded 26.5 x 1 for the unusual threads of the Yugo M85 and M92 PAP "krinkov" style pistols and rifles, and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers. The Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to thread down as far as possible on the muzzle.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  2. LUMA Medium safety for Tavor
    $29.95

    (LUMA safeties work on both the Tavor and the X95 Tavor)

    The LUMA safety (Lever, Upgraded Metal Ambidextrous) is a direct drop in metal safety upgrade that will work on both the left and right side of the Tavor SAR and Tavor X95.  

    The LUMA safety can be purchased individually or as a pair. We recommend going with a MEDIUM safety on the firing thumb side and a SLIM safety on the offhand side, but you can order any combination you want.

    The LUMA safety is available in two variations:

    LUMA MEDIUM - the same pad size as the original polymer safety, but with sharp edges rounded and smoothed. Perfect for a full, positive activation pad.

    LUMA SLIM - a low profile version that keeps out of the way and won't irritate or rub your hand while in the "FIRE" position as the original polymer safety has been known to do, but that still allows for easy manipulation of the safety. Perfect for the offhand safety.

    PLEASE NOTE: The LUMA safety levers may be a little snug on installation, especially on the left side of the rifle. This is intentional to prevent slop and looseness of the safety when it is installed. The best way to install is to use a drop of oil in the keyway on the back of the LUMA safety, and start it on the lug by "angling in" and wiggling a bit- once started it becomes easier to slide on.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 0.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. LUMA Slim safety for Tavor
    $29.95

    (LUMA safeties work on both the Tavor and the X95 Tavor)

    The LUMA safety (Lever, Upgraded Metal Ambidextrous) is a direct drop in metal safety upgrade that will work on both the left and right side of the Tavor SAR and Tavor X95.  

    The LUMA safety can be purchased individually or as a pair. We recommend going with a MEDIUM safety on the firing thumb side and a SLIM safety on the offhand side, but you can order any combination you want.

    The LUMA safety is available in two variations:

    LUMA MEDIUM - the same pad size as the original polymer safety, but with sharp edges rounded and smoothed. Perfect for a full, positive activation pad.

    LUMA SLIM - a low profile version that keeps out of the way and won't irritate or rub your hand while in the "FIRE" position as the original polymer safety has been known to do, but that still allows for easy manipulation of the safety. Perfect for the offhand safety.

    PLEASE NOTE: The LUMA safety levers may be a little snug on installation, especially on the left side of the rifle. This is intentional to prevent slop and looseness of the safety when it is installed. The best way to install is to use a drop of oil in the keyway on the back of the LUMA safety, and start it on the lug by "angling in" and wiggling a bit- once started it becomes easier to slide on.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 0.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. Manticore Arms "Rocker" style velcro backed patch FREE SHIPPING
    $6.00

    Show your pride in Manticore Arms products with these "Rocker" style velcro backed patches! Patches measure 3" in diameter with full color stitching on a blue base and are made in the USA. We are offering FREE SHIPPING on patches, and will ship them in a first class envelope if purchased on their own! Learn More
  5. Manticore Arms Rock Concert T-Shirt
    $20.00

    We've been told "Manticore Arms Rocks" so often, we decided it was time to release our Rock Concert Tee! Manticore Arms T-Shirts are Gildan brand T-shirts in black with a rockin' Manticore Arms image on the front, and our "Tour" appearances on the back for the last three years. Learn More
  6. NightBrake for 1/2x28 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 1/2 x 28 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  7. NightBrake for 14x1L
    $64.95

    With the same excellent performance as the original NightBrake, the new 14x1L threaded version features a single detent notch to time properly and wrench flats for those stubborn barrels. An included high temperature silicone washer eliminates rattle and keeps the device perfectly aligned when mounted.

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 14 x 1 L  and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  The 14 x 1 L threaded Nightbrake has a single detent notch and includes a high temperature silicone washer to prevent rattle when installed.  The muzzle device can be installed without the washer and will still function with no issues.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  8. NightBrake for 24mm
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one. A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature. The Nightbrake is threaded 24mm and will clear any projectile up to 0.311 caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part. The 24 mm threaded Nightbrake has a multiple detent notches to allow it to be threaded down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.2 ounces

    Length: 2.5 inches

    Learn More
  9. NightBrake for 5/8x24 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 5/8 x 24 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  10. Picatinny Transformer Panels
    $31.95

    Picatinny Transformer Panels allow for mounting of picatinny accessories directly to the Transformer Rail. 

    Panels are sold individually, and are available in two types - Full Picatinny with 11 slots across the whole surface, and Half Picatinny with 5 slots on one end and a smooth low profile surface on the other end.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing on aluminum   

    Weight: 1.2-1.5 ounces   

    Length: N/A 

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

21-30 of 75