FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

41-50 of 79

  1. Scorpion EVO Slider Stock Buttpad
    $20.00

    The Scorpion EVO Slider Stock Buttpad screws in via two supplied screws to the back of the Manticore Arms Scorpion EVO Slider Stock. This 1/2" thick internally reinforced buttpad will increase the length of pull and add a comfortable no-slip grip to the Slider Stock.

    Material:  Rubber like polymer with internal reinforcement

    Finish:  Black

    Weight: ?? ounces

    Length:  Adds 0.5" of length to Slider Stock

    100% designed and manufactured in the USA

    Learn More
  2. Scorpion EVO Switchback Charging Handle
    $82.95

    Based off the design of our incredibly popular and successful AUG Switchback and Tavor Switchback Charging Handles, the Scorpion EVO Switchback Charging Handle works in just the same way - fold out and pull back to charge the weapon and let go; the handle automatically returns to the folded position. It can even be locked into the holdback notch and given an "HK slap" and it will automatically go forward and fold.

    The best part is with the charging handle setup on the Scorpion EVO you can mount the Switchback Charging Handle on your primary charging side and mount your OEM handle on the off side, giving you dual charging ability on the gun.

    PLEASE NOTE: When removing the OEM or a Manticore charging handle from the scorpion, you will need to depress the detent spring through the lock pin hole to to prevent the spring from being bent, mangled, or damaged. Manticore Arms does not warranty springs damaged from improper removal of the handle. If in doubt on how to remove a handle properly, please email us at info@manticorearms.com

    PLEASE NOTE:   You are purchasing a single handle.  Photos show that two handles can be installed simultaneously and will work, but you have to order two handles to receive two handles.

    Material:  6061 aluminum and steel

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight:  1.2 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. Scorpion EVO Tri-Lug Adapter
    $49.95

    Developed specifically for the Scorpion EVO this model of the Eclipse has 18mm threads the Scorpion EVO Tri-Lug adapter mounts securely to the barrel with a 13/16" wrench (torque to approximately 25 ft lbs) and allows for mounting of all Tri-Lug accessories such as flash hiders and suppressors. The Scorpion EVO Tri-Lug Adapter is marked MA USA to denote a U.S. made part that counts towards 922r compliance.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.0 ounces

    Length: 2.4 inches

    100% designed and manufactured in the USA

    Learn More
  4. Shadow Flash Hider 1/2 x 28 tpi
    $43.95

    The Shadow Flash Hider is a more compact and economical version of the Eclipse flash hider that features three short, straight prongs for excellent flash hiding capability. The Shadow Flash Hider will clear any round up to 9mm in diameter (i.e. 300 Blackout, 5.56mm, .22LR, etc) and is threaded 1/2 x 28 tpi. It is marked "MA" and "9mm" to denote that it is a 922r compliant part made in the USA by Manticore Arms for any weapon up to 9mm caliber and comes with a crush washer.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.4 ounces

    Length: 1.75 inches

    100% designed and manufactured in the USA

    Learn More
  5. Shadow Flash Hider 18mm Scorpion EVO
    $49.95

    Developed specifically for the Scorpion EVO this model of Shadow has 18mm threads, and three shorter straight prongs make the device more compact while still giving plenty of flash suppression for the 9mm cartridge.  Six detent notches allow the muzzle device to thread down as much as possible, and the device is marked "MA USA"  to denote USA manufacture for 922r compliance.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.0 ounces

    Length:1.75 inches

    Designed and Manufactured 100% in the USA

    Learn More
  6. Switchback Charging Handle
    $74.95

    The Switchback Charging Handle is an innovative design that is folded out, pulled back to charge the firearm,  and when released will automatically run itself forward and fold back into the storage position.  The allows for a handle with a large gripping area when charging the firearm while having a low snag free  profile when not needed.

    On the AUG the Switchback Charging Handle can be rotated upwards into the rear locking notch to hold the bolt open and then slapped downward with an "HK slap" to send it forward and home.  The contact surface of the charging handle is a removable and replaceable polymer pad to prevent wear on the valuable AUG receiver.  

    The Switchback is a drop in replacement for any Steyr AUG A2 or A3 charging handle, or the charging handle for all MSAR series of STG and E4 rifles with the smaller curved back charging handles.  The older rectangular charging handle with forward assist button such as that used on the STG-77 or AUG A1 model uses a different receiver mounting lug and the Switchback is not compatible with that model of AUG charging handle.

    The Standard model gives a "three finger" grip on the deployed charging handle.

    Material: 6061 aluminum  (and polymer for wear pad)

    Finish:  Type III Hardcoat Milspec Anodizing

    Weight: 1.5 ounces

    Length:  N/A

    Learn More
  7. Talon Scope Mount for AUG A3
    $225.00

    Please Note: The Talon Scope Mount for the AUG A3 does not fit the AUG A3 M1; the correct item for the AUG A3 M1 is SKU MA-8240. Neither scope mount will fit the MSAR.

    The Talon Scope Mount for AUG A3 allows for mounting of a 30mm scope (or one inch scope with rings spacers, not included) on the Steyr AUG A3 and gives the look of the original AUG A1 with integral scope, but with more modern optics. An integral QD pocket is machined into the front of the scope mount to replace the one on the removed top rail. The mount includes the mount base, two ring tops, mounting hardware, and instruction sheet.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.7 ounces

    Length: N/A

    100% designed and manfuactured in the USA

    Learn More
  8. Talon Scope Mount for AUG M1
    $225.00

    Please Note: The Talon Scope Mount for the AUG A3 M1 does not fit the AUG A3; the correct item for the AUG A3 is SKU MA-8235. Neither scope mount is compatible with the MSAR.

    The Talon Scope Mount for AUG M1 allows for mounting of  a 30mm scope (or one inch scope with rings spacers, not included) on the AUG M1 and captures the look of the original AUG A1 with integral scope, but with more modern optics. The mount includes the mount base, two ring tops, mounting hardware, and instruction sheet.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.7 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  9. Tavor Gasketed Port Cover
    $47.95

    (The Gasketed Port Cover will work on both the Tavor and X95 Tavor)

    The Tavor Gasketed Port Cover uses the unique solution of a compressible gasket to stop gas leakage through the ejection port cover and is ideal for use when running a suppressor. An inner and outer panel are pulled together by two screws and the gasket is sandwiched and compressed between the two panels which causes it to expand and fill in every gap and thus guarantee a gas tight seal regardless of irregularity in the surfaces to be sealed.  The Gasketed Port cover is will work on both the left and right side ejection ports of the Tavor SAR and X95 and has an integral QD pocket for a sling mounting point.  All hardware, tools, and instructions are included for installation.

    Material: 6061 aluminum and rubber like polymer

    Finish:  Type III milspec hardcoat black anodizing, black finish on rubber like polymer

    Weight: 1.7 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  10. Tavor Overwatch Full Length Top Rail
    $126.95

    The top rail on the Tavor SAR is notoriously low and designed for taller Israeli made optics. The Overwatch top rail raises the rail height up approximately 1/2" which makes the height of the Tavor optics rail over the stock the exact same as that of an AR-15, and allows for comfortably mounting and using all of the standard optics and iron sights available in the AR-15 focused U.S. market. The Overwatch Full Length rail features 40 picatinny slots and can be used as a carry handle by gripping the front portion above the upper handguard.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 9.2 ounces

    Length: 14.5 inches

    Designed and Manufactured 100% in the USA

    Learn More

Grid List

Set Descending Direction

41-50 of 79