FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

5 Item(s)

  1. X95 Curved Buttpad (for X95 Tavor)
    $72.95

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE  X95 TAVOR AND NOT THE ORIGINAL TAVOR SAR

    Similar to our Tavor Curved Buttpad, the X95 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad.  The rubber pad is curved to conform to the shoulder and not only give better ergonomics and grip but also shortens the overall length of pull on the rifle.  By keeping the top edge the same length as the OEM buttpad the rifle does not drop under 26" inches in length, which if shorter than that would make it an NFA Short Barreled Rifle.

    The X95 curved buttpad is made by Manticore Arms in the USA.

     Please note that Tavor Curved Buttpads and X95 Curved Buttpads ARE NOT interchangeable- each model of IWI Tavor uses its own dedicated buttpad.  Please be sure to order the correct buttpad for your rifle, and if not sure please contact customer service at info@manticorearms.com

     

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 6.5 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  2. X95  Overwatch Medium Length Top Rail  (for X95 Tavor)
    $104.95

    Out of stock

    PLEASE NOTE:  The current Medium Length X95 Top Rail is cut for the 5.56 caliber guns, but 300 blackout guns will requrie rails with a slight modification.  Manticore Arms will perform this modifaction at no charge, please contact us at info@manticorearms.com prior to purchase.  Future production top rails will work on both 5.56 and 300 blackout guns without modification.

    The top rail on the Tavor X95 is notoriously low and designed for taller Israeli made optics. The Overwatch top rail raises the rail height up approximately 1/2" which makes the height of the X95 Tavor optics rail over the stock the exact same as that of an AR-15, and allows for comfortably mounting and using all of the standard optics and iron sights available in the AR-15 focused U.S. market. The X95 Overwatch Medium Length Top Rail rail features 21 picatinny slots and is shorter in length for those preferring a more compact and lighter setup.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.9 ounces

    Length: 9.0 inches

    100% designed and manufactured n the USA

    Learn More
  3. X95 Cantilever Forend  ( OEM Height Rail )
    $234.95

    Out of stock

    PLEASE NOTE:  The OEM Height top rail is cut to work with both 5.56 and 300 blackout guns.

    The Patent Pending  X95 Cantilever Forend offers a wealth of features at an incredible price.  To solve some of the inherent issues of how to securely mount a forend to the X95 without contacting the barrel we had to think outside the box, and the solution was a two part system.

    The first component consists of a 39 slot picatinny top rail and cover plate assembly that is matched to the height of the OEM top rail used on the X95.  This is a bit lower than the rail used on guns like the AR-15, but if you find the height of the OEM rail just right you will want to go with this top rail height!  In addition the top rail is cut for the 300 blackout gas adjustment access in case you are mounting on a 300 Blackout X95.

    The second component is the forend itself which is 2" longer than the OEM forend, features 3 rows of M-LOK (13 slots) on each side plus 2 QD points on each side,  and  5 slots of M-LOK on the underside.  The center row of M-LOK on the sides and the underside row on M-LOK is centered on the bore line making it much easier to zero lasers and other items that are bore line sensitive.   The top of the forend features two L-shaped tabs that engage matching slots on the top rail.  To install the forend portion just slide the forend into the slots on the top rail along the axis of the barrel, make sure the alignment tab on the underside engages the opening in the receiver,  tighten the cross bolt screw and you are ready to go with a rock solid mounted forend.  This along-the-bore-axis installation allows the additional benefit of being able to install a suppressor up to 1.5" in diameter on the barrel and the forend can easily be slid on and off without need to remove the suppressor.

    Not wanting to leave an opening where the lower plastic tab of the OEM forend engages, we have included a polymer filler block that blends perfectly with the receiver to keep everything closed up and tidy.

    One last benefit- with X95 Cantilever forend THE BARREL IS NOW FREE FLOATED.  No more contact of the barrel as with the OEM polymer forend and its two barrel mounted polymer support points, as the X95 Cantilever Forend is completely supported by the top rail and the receiver.

    Total weight of the system is 1 lb 3.5 ounces compared to the OEM 1 lb 2.5 ounces.  Only 1.0 ounce more than the OEM forend at a gain of all aluminum construction, the ability to sleeve a suppressor, a longer and higher and more useful top rail, and almost 2" of additional forend with a slimmer profile plus M-LOK compatibility and integral QD points.  Not a bad deal for a single extra ounce, is it?

    The X95 Cantilever Forend  is Patent Pending, and manufactured of 6061 black milspec hardcoated aluminum (plus a polymer filler block) 100% right here in the USA.

    Material:  6061 aluminum and polymer

    Finish:  Type III milspec hardcoat black anodizing 

    Weight:   1 lb 7.4 ounces

    Length:  For 16" and 18.5" barreled guns (2" longer than OEM forend)

    Learn More
  4. X95 Cantilever Forend  ( Taller Height Rail )
    $234.95

    Out of stock

    PLEASE NOTE:  The current product Taller (AR-15 height) Top Rail is cut for the 5.56 caliber guns, but 300 blackout guns will requrie rails with a slight modification.  Manticore Arms will perform this modifaction at no charge, please contact us at info@manticorearms.com prior to purchase.  Future production top rails will work on both 5.56 and 300 blackout guns without modification.

    The Patent Pending  X95 Cantilever Forend offers a wealth of features at an incredible price.  To solve some of the inherent issues of how to securely mount a forend to the X95 without contacting the barrel we had to think outside the box, and the solution was a two part system.

    The first component consists of a 39 slot picatinny top rail and cover plate assembly that is raised to the proper height to work with standard AR-15 iron sights and optics (i.e. most all sighting components on the market these days).  In addition the top rail is cut for the 300 blackout gas adjustment access in case you are mounting on a 300 Blackout X95.

    The second component is the forend itself which is 2" longer than the OEM forend, features 3 rows of M-LOK (13 slots) on each side plus 2 QD points on each side,  and  5 slots of M-LOK on the underside.  The center row of M-LOK on the sides and the underside row on M-LOK is centered on the bore line making it much easier to zero lasers and other items that are bore line sensitive.   The top of the forend features two L-shaped tabs that engage matching slots on the top rail.  To install the forend portion just slide the forend into the slots on the top rail along the axis of the barrel, make sure the alignment tab on the underside engages the opening in the receiver,  tighten the cross bolt screw and you are ready to go with a rock solid mounted forend.  This along-the-bore-axis installation allows the additional benefit of being able to install a suppressor up to 1.5" in diameter on the barrel and the forend can easily be slid on and off without need to remove the suppressor.

    Not wanting to leave an opening where the lower plastic tab of the OEM forend engages, we have included a polymer filler block that blends perfectly with the receiver to keep everything closed up and tidy.

    One last benefit- with X95 Cantilever forend THE BARREL IS NOW FREE FLOATED.  No more contact of the barrel as with the OEM polymer forend and its two barrel mounted polymer support points, as the X95 Cantilever Forend is completely supported by the top rail and the receiver.

    Total weight of the system is 1 lb 7.4 ounces compared to the OEM 1 lb 2.5 ounces.  Only 3.9 ounces more than the OEM forend at a gain of all aluminum construction, the ability to sleeve a suppressor, a longer and higher and more useful top rail, and almost 2" of additional forend with a slimmer profile plus M-LOK compatibility and integral QD points.  Not a bad deal for 3.9 extra ounces, is it?  

    The X95 Cantilever Forend  is Patent Pending, and manufactured of 6061 black milspec hardcoated aluminum (plus a polymer filler block) 100% right here in the USA.

    Material:  6061 aluminum and polymer

    Finish:  Type III milspec hardcoat black anodizing 

    Weight:   1 lb 7.4 ounces

    Length:  For 16" and 18.5" barreled guns (2" longer than OEM forend)

    100% designed and manufactured in the USA

    Learn More
  5. X95 Switchback Charging Handle
    $83.95

    Out of stock

    Please note: The X95 Switchback Charging Handle does not fit the Tavor SAR.

    Please Note:  You may see some coesmetic burnishing of the polymer where the charging handle rides on the slot.  This is completely normal, willnot harm the rifle, and also happens with the OEM charging handle.  I fyou are not comfortable with this cosmetic burnishing please do not purchase this product.

    The X95 Switchback is a folding charging handle that will work on either side of the X95. It offers the lowest possible profile when folded but a good two finger grip when deployed. The handle is folded out by hand, pulled back comfortably, and then released. The force of the handle going forward will cause it to flip forward, i.e. "switch back" to the stowage position and lock there via a spring loaded detent and small tab on the handle.  A 45 degree front face allows you to sweep the hand back to "find" the handle and deploy and pullin one single, smooth motion.

    The X95 Switchback is made in the USA of 6061 aluminum that is anodized black, and consists of a folding handle and lug with a steel rod, all of which are preassembled. The X95  Switchback not only can be mounted on either side of the X95 but with a small modification to the inner plastic gas cover it is possible to run two handles on the rifle at the same time.

    The X95 Switchback will work with both the OEM forends (both 16" and 13" SBR length) and with the Manticore X95 Cantilever Forend.

    Material:  6061 aluminum handle and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight:  2.5  ounces

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

5 Item(s)