FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Shop All

Shop All

Grid List

Set Descending Direction

5 Item(s)

  1. Renegade Forearm Polymer Top Cover
    $15.00

    The Renegade Polymer Top Cover allows you to close up the upper portion of the Renegade for a completed look when you do not need to mount an optic up front.

    Made of the same high temperature thermoset polymer as the Renegade Forend, and featuring a grooved surface to match the aesthetics of the lower it is the perfect way to get the full Renegade look on your Yugo PAP.

    The Renegade Polymer Top Cover will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Please note this part is only meant to be used with the Renegade Forend, and is not compatible with other forends for the Yugo PAP pistol.

    Material:  Polymer

    Finish:  Various Colors

    Weight: ??

    Length:  Only for use with Renegade Forend

    Learn More
  2. Renegade Handguard Assembly For Yugo M85 and M92
    $44.95

    The Renegade Forearm with Polymer Top Cover for Yugo Krink AK offers full protection of the fore end of the rifle with a high temperature thermoset polymer. The forearm features a a "bulged U" cross section giving greater ergonomics and blends perfectly into the front of the receiver unlike most other fore ends available.

    The forearm has texturing grooves at the gripping surface, and not one but two rows of ARClight slots on each side and even a row underneath that allow attachment of Manticore Arms ARC LOK rail segments, and even attachment of Magpul MOE series polymer rail segments and Impact Weapon Components Mount-N-Slot accessories.

    To compliment the Renegade forearm the top plate bolts securely onto the gas tube and allows mounting of various optics in a co-witness plane. Multiple models are available including the Burris Fastfire top plate and the Aimpoint Micro/Primary Arms Micro top plate. The Renegade forearm for Yugo AK will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Optics Mount Top Plates are made of 6061 anodized aluminum and come with the top plate, two "U" mounting brackets, 6-32 screws, allen wrench, and instructions for installation and are proudly made in the USA. Optics Mount Top Plates are only intended to be used with the Renegade polymer lower forearm.

    Colors are a prefect match to Magpul Black, FDE, and Russian Plum Colors.  Bakelite Orange is a match to authentic bakelite AK-47 magazines and to Tapco Orange.

    Material:  Polymer

    Finish:  Multiple colors

    Weight: 5.6 ounces

    Length:  Standard Yugo M85 and M92 PAP forend

    100% designed and manufactured in the USA

    Learn More
  3. ALFA RAIL Keymod Forend for Century C39V2 AK
    $118.95

    Out of stock

    Rock Solid, easy to install, and direct fit for most rifles

    Learn More
  4. PLM
    $112.95

    Out of stock

    The Chinese Stock bolts to any standard 10-32 bolt pattern stock adapter or hinge, such as those offered by Stormwerkz and ACE Rifle Stocks, It is easily adapted to any AK and can even be mounted to a Yugo PAP pistol by drilling and tapping two 10-32 holes in the rear trunnion (make sure the pistol is registered as an SBR before doing this.)  The rear of the stock has a machined rib pattern to give a good grip on the shoulder, and with the use of a hinge it can be configured to fold left or right. The Chinese Stock comes with the stock, two 10-32 bolts and washers. The Chinese Stock is 8.5 inches long, hinge adds about 0.625 inches to the length when installed. Overall length of pull from buttplate to face of trigger with Chiense Stock and Stormwerkz Hinge installed is 12.25 inches which is exactly the same LOP as a real Russian or Bulgarian Sidefolder AK.

    The stock comes with a choice of Bakelite Orange, Russian Plum, or Black side panels with all the hardware necessary to install them and the panels can be left of to get a skeletonized look.

    Material: 6061 aluminum

    Finish: type III milspec hardcoat black anodizing

    Weight: 10.0 ounces with panels

    Length: 8.5 inches (stock only not including hinge or mounting blocks)

    100% designed and manufactured in the USA

    Learn More
  5. Triangle Stock
    $112.95

    Out of stock

    Please note, no hinge or mounting block is included, these can be purchase at stormwerkz.com or a variety of other suppliers.

    The Triangle Stock bolts to any standard 10-32 bolt pattern stock adapter or hinge, such as those offered by Stormwerkz and ACE Riflestocks.  It is easily adapted to any AK, and can even be mounted to a Yugo PAP pistol by simply drilling and tapping two 10-32 holes in the rear trunnion (make sure the pistol is registered as an SBR before doing this.)

    Made of 6061 aluminum that is bead blasted and anodized black, the stock weighs only 10.0 ounces as the arms and rear of the stock are now scallop cut internally to reduce weight, and with a hinge installed will have the exact length of a true Russian or Bulgarian sidefolder stock. The rear of the stock has a machined rib pattern to give a good grip on the shoulder, and with the use of a hinge it can be configured to fold left or right. The Triangle Stock comes with the stock, two 10-32 bolts and washers. Overall LOP (Length Of Pull from buttplate to face of trigger) with Triangle Stock and Stormwerkz or Ace Riflestock Hinge installed is 12.25", exactly the same LOP as a real Russian or Bulgarian Sidefolder AK.

    Material: 6061 aluminum

    Finish: Type III milspec hardcoat black anodizing

    Weight: 11.0 ounces

    Length: 8.5 inches (stock only not including hinge or mounting blocks)

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

5 Item(s)