FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AK-47 and AK-74 rifle products

AK-47 and AK-74 rifle products

Grid List

Set Descending Direction

11-15 of 15

Page:
  1. 1
  2. 2
  1. Triangle Stock
    $112.95

    Please note, no hinge or mounting block is included, these can be purchase at stormwerkz.com or a variety of other suppliers.

    The Triangle Stock bolts to any standard 10-32 bolt pattern stock adapter or hinge, such as those offered by Stormwerkz and ACE Riflestocks.  It is easily adapted to any AK, and can even be mounted to a Yugo PAP pistol by simply drilling and tapping two 10-32 holes in the rear trunnion (make sure the pistol is registered as an SBR before doing this.)

    Made of 6061 aluminum that is bead blasted and anodized black, the stock weighs only 10.0 ounces as the arms and rear of the stock are now scallop cut internally to reduce weight, and with a hinge installed will have the exact length of a true Russian or Bulgarian sidefolder stock. The rear of the stock has a machined rib pattern to give a good grip on the shoulder, and with the use of a hinge it can be configured to fold left or right. The Triangle Stock comes with the stock, two 10-32 bolts and washers. Overall LOP (Length Of Pull from buttplate to face of trigger) with Triangle Stock and Stormwerkz or Ace Riflestock Hinge installed is 12.25", exactly the same LOP as a real Russian or Bulgarian Sidefolder AK.

    Material: 6061 aluminum

    Finish: Type III milspec hardcoat black anodizing

    Weight: 11.0 ounces

    Length: 8.5 inches (stock only not including hinge or mounting blocks)

    100% designed and manufactured in the USA

    Learn More
  2. Yugo Front Detent Kit (for Yugo M92 and M85 PAP)
    $12.95

    You may have discovered when removing the thread protector collar on your Yugo PAP pistol that there isn’t a front sight detent pin to hold your muzzle device in place. This part is the correct replacement for that missing pin.

    Manufactured from 4140 steel with a black oxide finish, the Yugo Front Detent Kit includes the detent pin, a spring, and a roll pin. Simply place the spring on the back of the detent pin, insert in the hole located in the front sight base, push in slightly against the spring pressure and tap in the roll pin. The Yugo Front Detent Kit is manufactured here in the U.S.A. and is the perfect addition to the Yugo M92 NightShroud or Yugo M92 NightBrake.

    Material:  4140 steel

    Finish:  Black oxide

    Weight:

    Length:  N/A

    Learn More
  3. Yugo Krinkov NightBrake 26mm
    $64.95

    Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms Yugo M92 NightBrake muzzle compensator is designed specifically for the 26x1.5 left hand thread found on the muzzle of the Yugoslavian M92 and M85 Krinkov rifles and PAP series of pistols. The NightBrake is designed to reduce felt recoil, virtually eliminate muzzle rise, and can safely pass any projectile up to 0.311" (0.30 caliber) in diameter, making it a universal muzzle device for both the M85 and M92. A total of eighteen ports distributed around the upper 270-degree arc of the device help stabilize and reduce exiting gas pressure, and the lower 90-degree arc has no ports to prevent a dust signature when fired.

    The Yugo M92 NightBrake flash hider is 2.125 inches long, adding only 1.125 inches to the overall length of the rifle- it is over an inch shorter than the standard M92 muzzle booster. In addition the weight is only 3.0 ounces, and it is marked "MANTICORE" to denote a U.S. made part that counts towards 922r compliance.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  2.7 ounces

    Length:  2.125 inches

    100% designed and manfuactured in the USA

    Learn More
  4. ALFA RAIL Keymod Forend for stamped AK
    $118.95

    Out of stock

    PLEASE NOTE: THE ALFA LOWER FOREND OPTION FOR $119 IS ONLY THE LOWER PORTION, THE UPPER HANDGARD IS NOT INCLUDED WITH THIS OPTION! THE MA-11275 ALFA HANDGUARD WILL ONLY FIT STANDARD STAMPED 'EURO' AND 'CHINESE' AK'S.

    THIS MODEL WILL NOT FIT YUGO M-70/N-PAP/O-PAP, KRINKOVS, M92'S, UNCONVENRTED VEPR'S OR UNCONVERTED SAIGAS.

    The ALFA RAIL Keymod forend for the standard pattern AK gives the look and feel of a more traditional AK forend while giving the ability to mount Keymod accessories and other optional components, all while mounting exactly like the original handguard.

    The forend is simply installed like any standard AK handguard and is held in place by the front handguard retainer. An extremely precise and tight fight, in addition to careful design of the interface points with weapon ensures that the mounting is rock solid.

    Weighing 3.5 ounces it is actually almost an ounce lighter than the original polymer forend, yet several times stronger. An optional Superlow Optics Mount Upper which weighs only 2 ounces allows you to mount an Aimpoint Micro on its picatinny top rail and have co-witness with the iron sights.

    The ALFA RAIL lower forend will work with the standard polymer or wood upper handguard, or even with an Ultimak railed upper gas tube. Manufactured from solid billets of 6061 T6 aluminum and anodized black the ALFA RAIL upper and lower include instructions and all hardware necessary for installation and are 100% made in the USA.

    Material: 6061 aluminum

    Finish: Type III Milspec Hardcoat Black Anodizing

    Weight: 3.5 ounces lower rail, 2.0 ounces optional top cover

    Length: Standard AK forend

    100% designed and manufactured in the USA.

    Learn More
  5. ALFA RAIL Keymod Forend Mini Draco
    $176.95

    Out of stock

    THE MA-12400 ALFA HANDGUARD WILL ONLY FIT THE MINI DRACO.

    The ALFA RAIL Keymod forend Min Draco gives the ability to use keymod accessories, mount an optic on the top picatinny, and even features an integral hand stop and QD sling swivel mounting point. The forend is installed like the standard Mini Draco handguard and is held in place by both the bolt on the underside and also features a flange that prevents the handguard from moving forward if the screw comes loose.

    An extremely precise and tight fight, in addition to careful design of the interface points with weapon ensures that the mounting is rock solid. The forend weighs only 4 oz, or approximately the same as the wood forend, yet offers much more in features. Manufactured from solid billets of 6061 T6 aluminum and anodized black the ALFA RAIL upper and lower include instructions and all hardware necessary for installation and are 100% made in the USA.

    Learn More

Grid List

Set Descending Direction

11-15 of 15

Page:
  1. 1
  2. 2