FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AK-47 and AK-74 rifle products

AK-47 and AK-74 rifle products

Grid List

Set Ascending Direction

1-10 of 13

Page:
  1. 1
  2. 2
  1. Yugo Krinkov NightBrake 26mm
    $64.95

    Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms Yugo M92 NightBrake muzzle compensator is designed specifically for the 26x1.5 left hand thread found on the muzzle of the Yugoslavian M92 and M85 Krinkov rifles and PAP series of pistols. The NightBrake is designed to reduce felt recoil, virtually eliminate muzzle rise, and can safely pass any projectile up to 0.311" (0.30 caliber) in diameter, making it a universal muzzle device for both the M85 and M92. A total of eighteen ports distributed around the upper 270-degree arc of the device help stabilize and reduce exiting gas pressure, and the lower 90-degree arc has no ports to prevent a dust signature when fired.

    The Yugo M92 NightBrake flash hider is 2.125 inches long, adding only 1.125 inches to the overall length of the rifle- it is over an inch shorter than the standard M92 muzzle booster. In addition the weight is only 3.0 ounces, and it is marked "MANTICORE" to denote a U.S. made part that counts towards 922r compliance.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  2.7 ounces

    Length:  2.125 inches

    100% designed and manfuactured in the USA

    Learn More
  2. Yugo Front Detent Kit (for Yugo M92 and M85 PAP)
    $12.95

    You may have discovered when removing the thread protector collar on your Yugo PAP pistol that there isn’t a front sight detent pin to hold your muzzle device in place. This part is the correct replacement for that missing pin.

    Manufactured from 4140 steel with a black oxide finish, the Yugo Front Detent Kit includes the detent pin, a spring, and a roll pin. Simply place the spring on the back of the detent pin, insert in the hole located in the front sight base, push in slightly against the spring pressure and tap in the roll pin. The Yugo Front Detent Kit is manufactured here in the U.S.A. and is the perfect addition to the Yugo M92 NightShroud or Yugo M92 NightBrake.

    Material:  4140 steel

    Finish:  Black oxide

    Weight:

    Length:  N/A

    Learn More
  3. Renegade Optics Mount Top Cover - Yugo AK

    The Optics Mount Top Plate is the perfect compliment the Renegade forearm, and the top plate bolts securely onto the gas tube and allows mounting of various optics in a co-witness plane. Multiple models are available including the Burris Fastfire top, Picatinny top plate and the Aimpoint Micro/Primary Arms Micro top plate. FOUR OPTIONS ARE AVAILABLE:

    1. Aimpoint Micro/Primary Arms top plate: Works with Aimpoint Micro and most Aimpoint Micro Clones including the Primary Arms model MD-ADS and MD-RBGII.

    2. Burris Fastfire top plate: Works with the Burris Fastfire

    3. Picatinny top plate: Includes the Burris Fastfire top cover and a bolt on 5 slot picatinny rail segment which attaches to the Burris Fastfire top plate and allows you to mount any picatinny based optic. Please note that you will not be able to co-witness with the iron sights when using the picatinny rail and mount.

    4. Picatinny rail only: Just the picatinny rail segment that can mount to the top of the Burris Fastfire top plate (for those who already have a Burris Fastfire top plate and wish to mount a picatinny based optic)

    The Optics Mount Top Plate for Yugo AK will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Optics Mount Top Plates are made of 6061 anodized aluminum and come with the top plate, two "U" mounting brackets, 6-32 screws, allen wrench, and instructions for installation and are proudly made in the USA. Optics Mount Top Plates are only intended to be used with the Renegade polymer lower forearm. THE OPTICS MOUNT TOP COVER SHOULD NOT BE USED ALONE, IT SHOULD ONLY BE USED WITH THE RENEGADE FOREARM. OPTICS MOUNT TOP COVERS ARE ONLY AVAILABLE SEPARATELY FOR THOSE WHO HAVE ALREADY PURCHASED THE POLYMER LOWER!

    Material:  6061 aluminum

    Finish:  Type III hardcoat milspec black anodizing

    Weight: 2.0 ounces

    Length:  Renegade forend only

    Learn More
  4. Renegade Handguard Assembly For Yugo M85 and M92
    $44.95

    The Renegade Forearm with Polymer Top Cover for Yugo Krink AK offers full protection of the fore end of the rifle with a high temperature thermoset polymer. The forearm features a a "bulged U" cross section giving greater ergonomics and blends perfectly into the front of the receiver unlike most other fore ends available.

    The forearm has texturing grooves at the gripping surface, and not one but two rows of ARClight slots on each side and even a row underneath that allow attachment of Manticore Arms ARC LOK rail segments, and even attachment of Magpul MOE series polymer rail segments and Impact Weapon Components Mount-N-Slot accessories.

    To compliment the Renegade forearm the top plate bolts securely onto the gas tube and allows mounting of various optics in a co-witness plane. Multiple models are available including the Burris Fastfire top plate and the Aimpoint Micro/Primary Arms Micro top plate. The Renegade forearm for Yugo AK will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Optics Mount Top Plates are made of 6061 anodized aluminum and come with the top plate, two "U" mounting brackets, 6-32 screws, allen wrench, and instructions for installation and are proudly made in the USA. Optics Mount Top Plates are only intended to be used with the Renegade polymer lower forearm.

    Colors are a prefect match to Magpul Black, FDE, and Russian Plum Colors.  Bakelite Orange is a match to authentic bakelite AK-47 magazines and to Tapco Orange.

    Material:  Polymer

    Finish:  Multiple colors

    Weight: 5.6 ounces

    Length:  Standard Yugo M85 and M92 PAP forend

    100% designed and manufactured in the USA

    Learn More
  5. Renegade Forearm Polymer Top Cover
    $15.00

    The Renegade Polymer Top Cover allows you to close up the upper portion of the Renegade for a completed look when you do not need to mount an optic up front.

    Made of the same high temperature thermoset polymer as the Renegade Forend, and featuring a grooved surface to match the aesthetics of the lower it is the perfect way to get the full Renegade look on your Yugo PAP.

    The Renegade Polymer Top Cover will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Please note this part is only meant to be used with the Renegade Forend, and is not compatible with other forends for the Yugo PAP pistol.

    Material:  Polymer

    Finish:  Various Colors

    Weight: ??

    Length:  Only for use with Renegade Forend

    Learn More
  6. NightBrake for 24mm
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one. A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature. The Nightbrake is threaded 24mm and will clear any projectile up to 0.311 caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part. The 24 mm threaded Nightbrake has a multiple detent notches to allow it to be threaded down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.2 ounces

    Length: 2.5 inches

    Learn More
  7. NightBrake for 14x1L
    $64.95

    With the same excellent performance as the original NightBrake, the new 14x1L threaded version features a single detent notch to time properly and wrench flats for those stubborn barrels. An included high temperature silicone washer eliminates rattle and keeps the device perfectly aligned when mounted.

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 14 x 1 L  and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  The 14 x 1 L threaded Nightbrake has a single detent notch and includes a high temperature silicone washer to prevent rattle when installed.  The muzzle device can be installed without the washer and will still function with no issues.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  8. Eclipse Flash Hider for Yugo Krinkov
    $64.95

    Designed specifically for the .308 and 7.62 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions. The device is threaded 26.5 x 1 for the unusual threads of the Yugo M85 and M92 PAP "krinkov" style pistols and rifles, and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers. The Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to thread down as far as possible on the muzzle.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  9. Eclipse Flash Hider 24mm
    $64.95

    Designed specifically for the 308  and 7.62 mm caliber cartridge the 24 mm Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 24mm  and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers.  The 24 mm Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to allow it to thread down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  10. Eclipse Flash Hider 14x1L
    $64.95

    Designed specifically for the 308 and 7.62 mm caliber cartridge the 14 x 1 L Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 14 x 1 L metric  and will clear any projectile up to 311 caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.  Use the crush washer instead of the detent pin for installation (detent pin may be left in place)

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Ascending Direction

1-10 of 13

Page:
  1. 1
  2. 2