AK-47 and AK-74 rifle products
The Renegade Forearm with Polymer Top Cover for Yugo Krink AK offers full protection of the fore end of the rifle with a high temperature thermoset polymer. The forearm features a a "bulged U" cross section giving greater ergonomics and blends perfectly into the front of the receiver unlike most other fore ends available.
The forearm has texturing grooves at the gripping surface, and not one but two rows of ARClight slots on each side and even a row underneath that allow attachment of Manticore Arms ARC LOK rail segments, and even attachment of Magpul MOE series polymer rail segments and Impact Weapon Components Mount-N-Slot accessories.
To compliment the Renegade forearm the top plate bolts securely onto the gas tube and allows mounting of various optics in a co-witness plane. Multiple models are available including the Burris Fastfire top plate and the Aimpoint Micro/Primary Arms Micro top plate. The Renegade forearm for Yugo AK will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Optics Mount Top Plates are made of 6061 anodized aluminum and come with the top plate, two "U" mounting brackets, 6-32 screws, allen wrench, and instructions for installation and are proudly made in the USA. Optics Mount Top Plates are only intended to be used with the Renegade polymer lower forearm.
Colors are a prefect match to Magpul Black, FDE, and Russian Plum Colors. Bakelite Orange is a match to authentic bakelite AK-47 magazines and to Tapco Orange.
Finish: Multiple colors
Weight: 5.6 ounces
Length: Standard Yugo M85 and M92 PAP forend
100% designed and manufactured in the USALearn More
Out of stock
The Renegade Polymer Top Cover allows you to close up the upper portion of the Renegade for a completed look when you do not need to mount an optic up front.
Made of the same high temperature thermoset polymer as the Renegade Forend, and featuring a grooved surface to match the aesthetics of the lower it is the perfect way to get the full Renegade look on your Yugo PAP.
The Renegade Polymer Top Cover will fit all models of Yugo M92 and M85 PAP pistol and rifle, and is proudly made in the USA. Please note this part is only meant to be used with the Renegade Forend, and is not compatible with other forends for the Yugo PAP pistol.
Finish: Various Colors
Length: Only for use with Renegade ForendLearn More
Out of stock
THE MA-12400 ALFA HANDGUARD WILL ONLY FIT THE MINI DRACO.
The ALFA RAIL Keymod forend Min Draco gives the ability to use keymod accessories, mount an optic on the top picatinny, and even features an integral hand stop and QD sling swivel mounting point. The forend is installed like the standard Mini Draco handguard and is held in place by both the bolt on the underside and also features a flange that prevents the handguard from moving forward if the screw comes loose.
An extremely precise and tight fight, in addition to careful design of the interface points with weapon ensures that the mounting is rock solid. The forend weighs only 4 oz, or approximately the same as the wood forend, yet offers much more in features. Manufactured from solid billets of 6061 T6 aluminum and anodized black the ALFA RAIL upper and lower include instructions and all hardware necessary for installation and are 100% made in the USA.Learn More
Out of stock
PLEASE NOTE: THE ALFA LOWER FOREND OPTION FOR $119 IS ONLY THE LOWER PORTION, THE UPPER HANDGARD IS NOT INCLUDED WITH THIS OPTION! THE MA-11275 ALFA HANDGUARD WILL ONLY FIT STANDARD STAMPED 'EURO' AND 'CHINESE' AK'S.
THIS MODEL WILL NOT FIT YUGO M-70/N-PAP/O-PAP, KRINKOVS, M92'S, UNCONVENRTED VEPR'S OR UNCONVERTED SAIGAS.
The ALFA RAIL Keymod forend for the standard pattern AK gives the look and feel of a more traditional AK forend while giving the ability to mount Keymod accessories and other optional components, all while mounting exactly like the original handguard.
The forend is simply installed like any standard AK handguard and is held in place by the front handguard retainer. An extremely precise and tight fight, in addition to careful design of the interface points with weapon ensures that the mounting is rock solid.
Weighing 3.5 ounces it is actually almost an ounce lighter than the original polymer forend, yet several times stronger. An optional Superlow Optics Mount Upper which weighs only 2 ounces allows you to mount an Aimpoint Micro on its picatinny top rail and have co-witness with the iron sights.
The ALFA RAIL lower forend will work with the standard polymer or wood upper handguard, or even with an Ultimak railed upper gas tube. Manufactured from solid billets of 6061 T6 aluminum and anodized black the ALFA RAIL upper and lower include instructions and all hardware necessary for installation and are 100% made in the USA.
Material: 6061 aluminum
Finish: Type III Milspec Hardcoat Black Anodizing
Weight: 3.5 ounces lower rail, 2.0 ounces optional top cover
Length: Standard AK forend
100% designed and manufactured in the USA.Learn More