FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AK-47 and AK-74 rifle products

AK-47 and AK-74 rifle products

Grid List

Set Descending Direction

1-10 of 17

Page:
  1. 1
  2. 2
  1. ALFA RAIL Keymod Forend for Century C39V2 AK
    $118.95

    Rock Solid, easy to install, and direct fit for most rifles

    Learn More
  2. ALFA RAIL Keymod Forend for stamped AK
    $118.95

    Rock Solid, easy to install, and direct fit for most rifles

    Learn More
  3. PLM
    $112.95

    ***PLEASE NOTE: STORMWERKZ HINGES ARE SOLD OUT***

    Get the look of a Chinese sidefolder stock without the hassle of a complete rebuild on your gun!

    Please select from the following colors: Learn More

  4. Eclipse Flash Hider 14x1L
    $64.95

    ZERO flash. Nada. None. Learn More
  5. Eclipse Flash Hider 24mm
    $64.95

    Developed after three years of testing and refinement the Manticore Arms Eclipse Flash Hider 24mm is the ultimate in flash suppression for the 24mm threaded AK! Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms Eclipse Flash Hider for Yugo Krinkov is designed specifically for the 24mm thread found on many models of AK including the Arsenal SLR series of rifles! The flash hider features three prongs at a slight angle and is designed to minimize the “ping” sound often heard with a pronged muzzle device. In addition, the threaded collar is specifically designed to 'bottom out' on the muzzle face for rattle free mounting, and has ten detent notches to guarantee there is one right where you need it. The Eclipse Flash Hider 24mm is marked “30 CAL" to denote its ability to clear any projectile up to 0.30 caliber and is also marked MA USA to denote a U.S. made part that counts towards 922r compliance. Learn More
  6. F3 (Flush Fit Folder) Stock Adapter for 4.5mm Sidefolder AK's
    $138.95

    The F3 Stock Adapter (F3 stands for "Flush Fit Folder" which was too much of a mouthful to say easily!) Stock Adapter is the first of its kind! Developed in conjunction with Circle 10 AK the F3 Stock Adapter is designed to mount on the standard 4.5mm Bulgarian side folding rear stock trunnion found on most Arsenal AK's (may be found on other models too). The tube offers 9 adjustable postiions for a milspec AR-15 carbine stock (commerical stocks will fit but will be a touch looser) and is cut out on the side so that the tube will lay completely flush against the side of the rifle when folded, even if the rifle has a side scope mount on it. Additionally, the back of the tube has a screw in plug, and will securely hold the "lipstick" cleaning kit tube- no, it won't fall out even though the side is partially cut away, and yes, you can still fold the stock flush with the cleaning tube in there! The F3 Stock Adapter is made of 6061 Aluminum with a black anodizing and is 100% made in the USA. (Please note the F3 Stock Adapter is not designed to fit "Russian" 5.5mm rear hinge blocks, make sure to verify which your rifle uses before ordering) Learn More
  7. NightBrake for 14x1L
    $64.95

    With the same excellent performance as the original NightBrake, the new 14x1L threaded version features a single detent notch to time properly and wrench flats for those stubborn barrels. An included high temperature silicone washer eliminates rattle and keeps the device perfectly aligned when mounted. The NightBrake is specifically designed to provide recoil reduction and virtually eliminate muzzle rise. A total of eighteen ports distributed around the upper 270 degrees of the device help stabilize and reduce exiting gas pressure. There are no ports facing directly upwards to allow for an uninterrupted sight picture when firing, and the lower 90 degree arc has no ports to prevent a dust signature when fired. The NightBrake 14x1L will clear any projectile up to .30 caliber (0.311") safely and is discretely marked "MA" on the underside to denote it as a USA made 922r compliance part. Weighing only 2 ounces and only 1.875" in length, it is machined from 8620 steel bar stock, heat treated, and finished in a deep black oxide. See videos comparing the performance of the NightBrake to other common muzzle devices at http://www.youtube.com/manticorearms  Learn More
  8. NightBrake for 24mm
    $64.95

    Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms NightBrake muzzle compensator is designed specifically for the 24mm thread found on the muzzle of most AK-74 rifles. The NightBrake is specifically designed to provide recoil reduction and virtually eliminate muzzle rise while being almost an inch shorter than any other muzzle compensator currently offered. A total of eighteen ports distributed around the upper 270 degrees of the device help stabilize and reduce exiting gas pressure. There are no ports facing directly upwards to allow for an uninterrupted sight picture when firing, and the lower 90 degree arc has no ports to prevent a dust signature when fired. The NightBrake muzzle compensator is 2.5 inches long with a weight of 3.2 ounces and is engraved MANTICORE to denote it as a U.S. made part that counts towards 922r compliance. As with all our 24mm muzzle devices, the NightBrake can safely be used with rifles with projectiles up to 0.311 (7.62mm) in diameter See videos comparing the performance of the NightBrake to other common AK-74 muzzle devices at http://www.youtube.com/manticorearms Learn More
  9. Renegade Forearm Polymer Top Cover
    $15.00

    The Renegade Polymer Top Cover allows you to close up the upper portion of the Renegade for a completed look when you do not need to mount an optic up front.

    Learn More
  10. Renegade Handguard Assembly For Yugo M85 and M92
    $44.95

    The Renegade Forearm with Polymer Top Cover for Yugo Krink AK offers full protection of the fore end of the rifle with a high temperature thermoset polymer. The forearm features a a "bulged U" cross section giving greater ergonomics and blends perfectly into the front of the receiver unlike most other fore ends available.

    The forearm has texturing grooves at the gripping surface, and not one but two rows of ARClight slots on each side and even a row underneath that allow attachment of all ARClight accessories that we offer including our new ARC LOK rail segments, and even attachment of Magpul polyer rail segments and Impact Weapon Components Mount-N-Slot accessories.

    Learn More

Grid List

Set Descending Direction

1-10 of 17

Page:
  1. 1
  2. 2