FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AK-47 and AK-74 rifle products

AK-47 and AK-74 rifle products

Grid List

Set Descending Direction

6 Item(s)

  1. Eclipse Flash Hider 14x1L
    $64.95

    Designed specifically for the 308 and 7.62 mm caliber cartridge the 14 x 1 L Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 14 x 1 L metric  and will clear any projectile up to 311 caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.  Use the crush washer instead of the detent pin for installation (detent pin may be left in place)

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  2. Eclipse Flash Hider 24mm
    $64.95

    Designed specifically for the 308  and 7.62 mm caliber cartridge the 24 mm Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 24mm  and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers.  The 24 mm Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to allow it to thread down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  3. Eclipse Flash Hider for Yugo Krinkov
    $64.95

    Designed specifically for the .308 and 7.62 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions. The device is threaded 26.5 x 1 for the unusual threads of the Yugo M85 and M92 PAP "krinkov" style pistols and rifles, and will clear any projectile up to .311 caliber and 7.62 mm. Do not use with larger calibers. The Eclipse Flash Hider is marked "MA" and "30" and has multiple detent notches to thread down as far as possible on the muzzle.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  4. NightBrake for 24mm
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one. A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature. The Nightbrake is threaded 24mm and will clear any projectile up to 0.311 caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part. The 24 mm threaded Nightbrake has a multiple detent notches to allow it to be threaded down as far as possible.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight: 3.2 ounces

    Length: 2.5 inches

    Learn More
  5. Yugo Krinkov NightBrake 26mm
    $64.95

    Machined from 8620 steel with a black oxide finish and heat treated for a life of hard use, the Manticore Arms Yugo M92 NightBrake muzzle compensator is designed specifically for the 26x1.5 left hand thread found on the muzzle of the Yugoslavian M92 and M85 Krinkov rifles and PAP series of pistols. The NightBrake is designed to reduce felt recoil, virtually eliminate muzzle rise, and can safely pass any projectile up to 0.311" (0.30 caliber) in diameter, making it a universal muzzle device for both the M85 and M92. A total of eighteen ports distributed around the upper 270-degree arc of the device help stabilize and reduce exiting gas pressure, and the lower 90-degree arc has no ports to prevent a dust signature when fired.

    The Yugo M92 NightBrake flash hider is 2.125 inches long, adding only 1.125 inches to the overall length of the rifle- it is over an inch shorter than the standard M92 muzzle booster. In addition the weight is only 3.0 ounces, and it is marked "MANTICORE" to denote a U.S. made part that counts towards 922r compliance.

    Material:  8620 steel with heat treat

    Finish:  Black oxide

    Weight:  2.7 ounces

    Length:  2.125 inches

    100% designed and manfuactured in the USA

    Learn More
  6. NightBrake for 14x1L
    $64.95

    Out of stock

    With the same excellent performance as the original NightBrake, the new 14x1L threaded version features a single detent notch to time properly and wrench flats for those stubborn barrels. An included high temperature silicone washer eliminates rattle and keeps the device perfectly aligned when mounted.

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 14 x 1 L  and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  The 14 x 1 L threaded Nightbrake has a single detent notch and includes a high temperature silicone washer to prevent rattle when installed.  The muzzle device can be installed without the washer and will still function with no issues.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More

Grid List

Set Descending Direction

6 Item(s)