FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AR-15 and M-16 rifle products

AR-15 and M-16 rifle products

Grid List

Set Descending Direction

1-10 of 12

Page:
  1. 1
  2. 2
  1. 13"  GEN II Transformer Rail for AR-15
    $154.95

    Your rail now automatically ships with (6)  Snakeskin polymer grip panels at not charge!

    GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look than the original Transformer Rail!

     M-LOK and Keymod....ON THE SAME RAIL!

    The Transformer Rail comes with the rail, barrel nut, barrel nut wrench, and six polymer grip panels.  Additional panels available in pulldown menus!

    Specifications:

    • AR-15 Aluminum Free Float rail system with ability to intermix Keymod, M-LOK, and polymer grip panels

    • Dimensions: 13” length, 1.5” exterior width, 1.09” interior clear width

    • Weight: 7.4 ounces for rail, 1.5 ounces for barrel nut, under 0.3 ounces per panel

    • Weight installed: 8.9 ounces (only adds 7.4 ounces as original barrel nut is removed)

    • Barrel nut material and finish: 6061 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Rail material and finish: 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Panel material and finish: 6061 black anodized aluminum and proprietary polymer 

    • Ships with Transformer Rail, Barrel Nut, Barrel Nut Wrench, all hardware, 6 polymer grip panels, allen wrenches, and instruction sheet

    • Interchangeable Transformer panel system allows for mixing of Keymod, M-LOK, and polymer grip panels. Other panels, such as Picatinny, will launch after initial release

    • Six Transformer panel mounting locations

    • GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look than the original Transformer Rail!

    • Eight QD sling swivel pockets- three on each side and two underneath

    • Clears low profile gas blocks and works with all gas system lengths (carbine, midlength, rifle)

    • 100% Designed and Made in the USA

    • Multiple Patents Pending

    Learn More
  2. 15"  GEN II Transformer Rail for AR-15
    $164.95

    Your rail now automatically ships with (6)  Snakeskin polymer grip panels at no charge!

    GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look than the original Transformer Rail!

     M-LOK and Keymod....ON THE SAME RAIL!

    The Transformer Rail comes with the rail, barrel nut, barrel nut wrench, and six polymer grip panels.  Additional types of panels can be added below!

    Specifications:

    • AR-15 Aluminum Free Float rail system with ability to intermix Keymod, M-LOK, and polymer grip panels

    • Dimensions: 15” length, 1.5” exterior width, 1.09” interior clear width

    • Weight: 8.4 ounces for rail, 1.5 ounces for barrel nut, under 0.3 ounces per panel

    • Weight installed: 9.9 ounces (only adds 7.4 ounces as original barrel nut is removed)

    • Barrel nut material and finish: 6061 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Rail material and finish: 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Panel material and finish: 6061 black anodized aluminum and proprietary polymer 

    • Ships with Transformer Rail, Barrel Nut, Barrel Nut Wrench, all hardware, 6 polymer grip panels, allen wrenches, and instruction sheet

    • Interchangeable Transformer panel system allows for mixing of Keymod, M-LOK, and polymer grip panels. Other panels, such as Picatinny, will launch after initial release

    • Six Transformer panel mounting locations

    • GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look than the original Transformer Rail!

    • Eight QD sling swivel pockets- three on each side and two underneath

    • Clears low profile gas blocks and works with all gas system lengths (carbine, midlength, rifle)

    • 100% Designed and Made in the USA

    • Multiple Patents Pending

    Learn More
  3. 15"  MLOK Rail for AR-15
    $164.95

    Specifications:

    • AR-15 Aluminum Free Float rail system with M-LOK slots on sides and underside, picatinny on top.

    • Dimensions: 15” length, 1.5” exterior width, 1.09” interior clear width

    • Weight: 8.4 ounces for rail, 1.5 ounces for barrel nut

    • Weight installed: 9.9 ounces (only adds 7.4 ounces as original barrel nut is removed)

    • Barrel nut material and finish: 6061 6061 T6 aluminum with Milspec Type III Black hardcoat anodizing

    • Rail material and finish: 6061 T6 aluminum with  Milspec Type III Black hardcoat anodizing

    • Panel material and finish: 6061 black anodized aluminum and proprietary polymer 

    • Ships with M-LOK Rail, Barrel Nut, Barrel Nut Wrench, all hardware, allen wrenches, and instruction sheet

    • The Manticore GEN II barrel nut design is lighter, simpler, and easier to install!  Just torque to the recommend barrel nut torque setting, slide rail over and install 8 set screws and you are done!  No need to time barrel nut or align threaded holes, plus a cleaner look!

    • Clears low profile gas blocks and works with all gas system lengths (carbine, midlength, rifle)

    • 100% Designed and Made in the USA

    Learn More
  4. Afterburner Linear Compensator 1/2x28 tpi
    $43.95

    The Afterburner Linear Compensator is one of the slimmest linear compensators on the market, yet is designed to give the same performance of larger "fatty" linear comps made by other companies. Measuring 1.00 inches in diameter and 2.25 inches in length with a 1.80 inch long inner chamber, the Afterburner features internal threading which serves dual purposes: distributing gas flow to reduce flash and provide a threaded surface where optional threaded muzzle ends, such as flash hider and compensator tips, can be added on for additional effect. The Afterburner will fit inside the Manticore Arms AR-15 Transformer Forend. The Afterburner Linear Compensator is marked "MA" and "USA" to denote 922r compliance and includes a crush washer and has wrench flats for ease of installation

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.4 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  5. Eclipse Flash Hider 1/2x28 tpi
    $64.95

    Designed specifically for the .223 and 5.56 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 1/2 x 28 tpi and will clear any projectile up to .223 caliber and 5.56 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "223" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  6. Eclipse Flash Hider 1/2x28 tpi parkerized CONTRACT OVERRUN
    $49.95

    Designed specifically for the .223 and 5.56 mm caliber cartridge the Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 1/2 x 28 tpi and will clear any projectile up to .223 caliber and 5.56 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "223" and can have a HK retainer spring installed (not included) to retain on the spines on typical HK style barrels.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  parkerized

    Weight: 3.6 ounces

    Length: 2.25 inches

    Designed and Manufactured 100% in the USA

    Learn More
  7. Eclipse Flash Hider 5/8x24 tpi
    $64.95

    Designed specifically for the .308 and 7.62mm caliber cartridge the 5/8 x 24 tpi Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 5/8 x 24 tpi and will clear any projectile up to .308  caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  8. NightBrake for 1/2x28 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 1/2 x 28 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  9. NightBrake for 5/8x24 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 5/8 x 24 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  10. Reverb Muzzle Brake 1/2 x 28 tpi
    $43.95

    The Reverb Muzzle Brake is a compact muzzle compensator that will work with any round under 9mm in diameter (i.e. 300 Blackout, 5.56mm, etc) on 1/2 x 28 tpi threaded barrels.

    Learn More

Grid List

Set Descending Direction

1-10 of 12

Page:
  1. 1
  2. 2