FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

AUG rifle products

AUG rifle products

Grid List

Set Descending Direction

6 Item(s)

  1. Brass Buster brass deflector
    $17.95

    The Brass Buster is designed as a removable and ambidextrous polymer brass deflector to allow weak side shooting with the Steyr AUG and Steyr AUG clones.  Simply press the Brass Buster down onto the stock behind the ejection port with the projection on the ejection port side.  Regardless of if your ejection port is on the left or right side of the gun the Brass Buster can be installed.

    The Brass Buster is compatible with all Steyr Aug, MSAR STG-556 (all generations) and E4, and all TPD AXR series rifle, and includes the brass deflector and an instruction sheet.

    Material:  Polymer

    Finish:  Black with very light texture

    Weight:  1.0

    Length:  N/A

    Learn More
  2. Talon Scope Mount for AUG A3
    $225.00

    Please Note: The Talon Scope Mount for the AUG A3 does not fit the AUG A3 M1; the correct item for the AUG A3 M1 is SKU MA-8240. Neither scope mount will fit the MSAR.

    The Talon Scope Mount for AUG A3 allows for mounting of a 30mm scope (or one inch scope with rings spacers, not included) on the Steyr AUG A3 and gives the look of the original AUG A1 with integral scope, but with more modern optics. An integral QD pocket is machined into the front of the scope mount to replace the one on the removed top rail. The mount includes the mount base, two ring tops, mounting hardware, and instruction sheet.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.7 ounces

    Length: N/A

    100% designed and manfuactured in the USA

    Learn More
  3. Talon Scope Mount for AUG M1
    $225.00

    Please Note: The Talon Scope Mount for the AUG A3 M1 does not fit the AUG A3; the correct item for the AUG A3 is SKU MA-8235. Neither scope mount is compatible with the MSAR.

    The Talon Scope Mount for AUG M1 allows for mounting of  a 30mm scope (or one inch scope with rings spacers, not included) on the AUG M1 and captures the look of the original AUG A1 with integral scope, but with more modern optics. The mount includes the mount base, two ring tops, mounting hardware, and instruction sheet.

    Material:  6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.7 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. Raptor Charging Handle
    $17.95

    Out of stock

    The Raptor Charging Handle was developed as a specific solution for those who do not like the standard charging handle on the Steyr AUG and MSAR series of rifles. The handle projects out horizontally which allows for a more natural, ergonomic grip and is sized for two fingers to grip the handle comfortably. The Raptor has no sharp edges or ridges and is lightly textured. The horizontal design of the handle allows for clearance of bulky optics such as the Eotech when mounted on both the standard height and even lower height  top rails, and will prevent the dreaded "bloody knuckle" encounter with the side of the optic when charging the rifle in a hurry or under pressure.

    Material:  Polymer

    Finish: Black with light texture

    Weight:  0.8 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  5. Switchback Charging Handle
    $74.95

    Out of stock

    The Switchback Charging Handle is an innovative design that is folded out, pulled back to charge the firearm,  and when released will automatically run itself forward and fold back into the storage position.  The allows for a handle with a large gripping area when charging the firearm while having a low snag free  profile when not needed.

    On the AUG the Switchback Charging Handle can be rotated upwards into the rear locking notch to hold the bolt open and then slapped downward with an "HK slap" to send it forward and home.  The contact surface of the charging handle is a removable and replaceable polymer pad to prevent wear on the valuable AUG receiver.  

    The Switchback is a drop in replacement for any Steyr AUG A2 or A3 charging handle, or the charging handle for all MSAR series of STG and E4 rifles with the smaller curved back charging handles.  The older rectangular charging handle with forward assist button such as that used on the STG-77 or AUG A1 model uses a different receiver mounting lug and the Switchback is not compatible with that model of AUG charging handle.

    The Standard model gives a "three finger" grip on the deployed charging handle.

    Material: 6061 aluminum  (and polymer for wear pad)

    Finish:  Type III Hardcoat Milspec Anodizing

    Weight: 1.5 ounces

    Length:  N/A

    Learn More
  6. Switchback Charging Handle MINI
    $74.95

    Out of stock

    The Switchback Charging Handle is an innovative design that is folded out, pulled back to charge the firearm,  and when released will automatically run itself forward and fold back into the storage position.  The allows for a handle with a large gripping area when charging the firearm while having a low snag free  profile when not needed.

    On the AUG the Switchback Charging Handle can be rotated upwards into the rear locking notch to hold the bolt open and then slapped downward with an "HK slap" to send it forward and home.  The contact surface of the charging handle is a removable and replaceable polymer pad to prevent wear on the valuable AUG receiver.  

    The Switchback is a drop in replacement for any Steyr AUG A2 or A3 charging handle, or the charging handle for all MSAR series of STG and E4 rifles with the smaller curved back charging handles.  The older rectangular charging handle with forward assist button such as that used on the STG-77 or AUG A1 model uses a different receiver mounting lug and the Switchback is not compatible with that model of AUG charging handle.

    The Mini model gives a "two finger" grip on the deployed charging handle.

    Material: 6061 aluminum  (and polymer for wear pad)

    Finish:  Type III hardcoat milspec black anodizing

    Weight: 1.4 ounces 

    Length:  N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

6 Item(s)