FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Tavor 7 products

Grid List

Set Descending Direction

5 Item(s)

  1. Eclipse Flash Hider 5/8x24 tpi
    $64.95

    Designed specifically for the .308 and 7.62mm caliber cartridge the 5/8 x 24 tpi Eclipse Flash Hider uses a slightly twisted triple prong design to reduce flash to near zero in even total darkness conditions.  The device is threaded 5/8 x 24 tpi and will clear any projectile up to .308  caliber and 7.62 mm. Do not use with larger calibers.  The Eclipse Flash Hider is marked "MA" and "30" and a crush washer is included.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 3.6 ounces

    Length: 2.25 inches

    100% designed and manufactured in the USA

    Learn More
  2. LUMA Medium safety for Tavor
    $29.95

    (LUMA safeties work on both the Tavor and the X95 Tavor)

    The LUMA safety (Lever, Upgraded Metal Ambidextrous) is a direct drop in metal safety upgrade that will work on both the left and right side of the Tavor SAR and Tavor X95.  

    The LUMA safety can be purchased individually or as a pair. We recommend going with a MEDIUM safety on the firing thumb side and a SLIM safety on the offhand side, but you can order any combination you want.

    The LUMA safety is available in two variations:

    LUMA MEDIUM - the same pad size as the original polymer safety, but with sharp edges rounded and smoothed. Perfect for a full, positive activation pad.

    LUMA SLIM - a low profile version that keeps out of the way and won't irritate or rub your hand while in the "FIRE" position as the original polymer safety has been known to do, but that still allows for easy manipulation of the safety. Perfect for the offhand safety.

    PLEASE NOTE: The LUMA safety levers may be a little snug on installation, especially on the left side of the rifle. This is intentional to prevent slop and looseness of the safety when it is installed. The best way to install is to use a drop of oil in the keyway on the back of the LUMA safety, and start it on the lug by "angling in" and wiggling a bit- once started it becomes easier to slide on.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 0.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. LUMA Slim safety for Tavor
    $29.95

    (LUMA safeties work on both the Tavor and the X95 Tavor)

    The LUMA safety (Lever, Upgraded Metal Ambidextrous) is a direct drop in metal safety upgrade that will work on both the left and right side of the Tavor SAR and Tavor X95.  

    The LUMA safety can be purchased individually or as a pair. We recommend going with a MEDIUM safety on the firing thumb side and a SLIM safety on the offhand side, but you can order any combination you want.

    The LUMA safety is available in two variations:

    LUMA MEDIUM - the same pad size as the original polymer safety, but with sharp edges rounded and smoothed. Perfect for a full, positive activation pad.

    LUMA SLIM - a low profile version that keeps out of the way and won't irritate or rub your hand while in the "FIRE" position as the original polymer safety has been known to do, but that still allows for easy manipulation of the safety. Perfect for the offhand safety.

    PLEASE NOTE: The LUMA safety levers may be a little snug on installation, especially on the left side of the rifle. This is intentional to prevent slop and looseness of the safety when it is installed. The best way to install is to use a drop of oil in the keyway on the back of the LUMA safety, and start it on the lug by "angling in" and wiggling a bit- once started it becomes easier to slide on.

    Material: 6061 aluminum

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 0.1 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  4. NightBrake for 5/8x24 tpi
    $64.95

    The Nightbrake provides both muzzle rise reduction and recoil reduction all in one.  A total of 18 ports distributed on the up half of the muzzle device help stabilize and reduce exiting gas pressure while the lack of ports on the underside prevent dust signature.  The Nightbrake is threaded 5/8 x 24 tpi and will clear any projectile up to 0.311  caliber or 7.62 mm, and is marked "MA" to denote it as a USA made 922r compliant part.  A crush washer is included with the muzzle device.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish: Black oxide

    Weight:  2.0 ounces

    Length: 1.875 inches

    Learn More
  5. Tavor 7 Curved Buttpad
    $72.95

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE  TAVOR 7.  IT WILL NOT FIT THE TAVOR SAR OR TAVOR X95

    Similar to our Tavor Curved Buttpad, the Tavor 7 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad.  The rubber pad is curved to conform to the shoulder and gives both better ergonomics and a better grip so the rifle does not slide around.

    The Tavor 7 Curved Buttpad is made by Manticore Arms in the USA.

     Please be sure to order the correct buttpad for your rifle, and if not sure please contact customer service at info@manticorearms.com

     

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 6.5 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

5 Item(s)