FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

Tavor rifle products

Tavor rifle products

Grid List

Set Descending Direction

11-17 of 17

Page:
  1. 1
  2. 2
  1. Shadow Flash Hider 1/2 x 28 tpi
    $43.95

    The Shadow Flash Hider is a more compact and economical version of the Eclipse flash hider that features three short, straight prongs for excellent flash hiding capability. The Shadow Flash Hider will clear any round up to 9mm in diameter (i.e. 300 Blackout, 5.56mm, .22LR, etc) and is threaded 1/2 x 28 tpi. It is marked "MA" and "9mm" to denote that it is a 922r compliant part made in the USA by Manticore Arms for any weapon up to 9mm caliber and comes with a crush washer.

    Material: 8620 steel with Rockwell 50C heat treat

    Finish:  Black oxide

    Weight: 2.4 ounces

    Length: 1.75 inches

    100% designed and manufactured in the USA

    Learn More
  2. Tavor Curved Buttpad
    $72.95

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE "ORIGINAL" TAVOR (SAR MODEL) AND WILL NOT FIT THE X95

    Due to the large number of people who accidentally order this pad for their X95, if you order this for your X95 and want to return, you will have to return this buttpad for a refund on the price of it and re-order the correct one for the X95.   We will no longer do a "swap"  as we keep losing money on shipping from people do not reading the note above.

    The Tavor Curved Buttpad solves the length of pull and shouldering issues many people have with the existing Tavor rifle and buttpad.

    Manufactured from 6061 T6 aluminum and a specially chosen chemically resistant polymer with just a bit of "give" to it, the Tavor Curved Buttapd reduces the length of pull by almost an inch, and allows you to easily roll and lock the gun right into the shoulder pocket. Ribbing on the back and the texture of the polymer guarantee the gun will not slip around in the shoulder pocket once mounted. The special curved shape reduces the length of pull while keeping the overall length of the weapon the same as with the existing buttpad, which means that the gun stays just over 26" and there are no NFA issues.

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 5.3 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  3. Tavor Overwatch Full Length Top Rail
    $126.95

    The top rail on the Tavor SAR is notoriously low and designed for taller Israeli made optics. The Overwatch top rail raises the rail height up approximately 1/2" which makes the height of the Tavor optics rail over the stock the exact same as that of an AR-15, and allows for comfortably mounting and using all of the standard optics and iron sights available in the AR-15 focused U.S. market. The Overwatch Full Length rail features 40 picatinny slots and can be used as a carry handle by gripping the front portion above the upper handguard.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 9.2 ounces

    Length: 14.5 inches

    Designed and Manufactured 100% in the USA

    Learn More
  4. Tavor Overwatch Medium Length Top Rail
    $104.95

    The top rail on the Tavor SAR is notoriously low and designed for taller Israeli made optics. The Overwatch top rail raises the rail height up approximately 1/2" which makes the height of the Tavor optics rail over the stock the exact same as that of an AR-15, and allows for comfortably mounting and using all of the standard optics and iron sights available in the AR-15 focused U.S. market. The Overwatch Medium Length Top Rail rail features 21 picatinny slots and is shorter for those preferring a more compact and lighter setup.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.9 ounces

    Length: 9 inches

    100% designed and manufactured in the USA

    Learn More
  5. ARClight Tavor Cover Plate
    $27.95

    Out of stock

    The Cover Plate allows you to close off the front end of the ARClight and ARClight XTL forend for when you do not want to mount a light internally. The Cover Plate is made from black anodized 6061 aluminum and is made in the USA. It includes all necessary hardware for mounting. Learn More
  6. Tavor Gasketed Port Cover
    $47.95

    Out of stock

    (The Gasketed Port Cover will work on both the Tavor and X95 Tavor)

    The Tavor Gasketed Port Cover uses the unique solution of a compressible gasket to stop gas leakage through the ejection port cover and is ideal for use when running a suppressor. An inner and outer panel are pulled together by two screws and the gasket is sandwiched and compressed between the two panels which causes it to expand and fill in every gap and thus guarantee a gas tight seal regardless of irregularity in the surfaces to be sealed.  The Gasketed Port cover is will work on both the left and right side ejection ports of the Tavor SAR and X95 and has an integral QD pocket for a sling mounting point.  All hardware, tools, and instructions are included for installation.

    Material: 6061 aluminum and rubber like polymer

    Finish:  Type III milspec hardcoat black anodizing, black finish on rubber like polymer

    Weight: 1.7 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More
  7. Tavor Switchback Charging Handle
    $83.95

    Out of stock

    Please note: The Tavor Switchback Charging Handle does not fit the X95.

    The Tavor Switchback is a folding charging handle that will work on either side of the Tavor. It offers the lowest possible profile when folded but a good two finger grip when deployed. The handle is folded out by hand, pulled back, and then released. The force of the handle going forward will cause it to flip forward, i.e. "switch back" to the stowage position and lock there via a spring loaded detent and small tab on the handle. The Tavor Switchbackconsists of an inner lug and rod assembly and an outer handle assemble which are attached by two screws and includes the componets, hardware, allen wrench, and instruction sheet necessary for installation. The Tavor Switchback not only can be mounted on either side of the Tavor but with a small modification to the inner plastic gas cover it is possible to run two handles on the rifle at the same time.

    Material: 6061 aluminum and steel rod

    Finish:  Type III milspec hardcoat black anodizing on aluminum and black oxide on steel

    Weight: 3.4 ounces

    Length: N/A

    Designed and Manufactured 100% in the USA

    Learn More

Grid List

Set Descending Direction

11-17 of 17

Page:
  1. 1
  2. 2