FLAT RATE SHIPPING ON ALL ORDERS!

QUESTIONS? CALL 866-331-9472

X95 Tavor products

X95 Tavor products

Grid List

Set Descending Direction

11-13 of 13

Page:
  1. 1
  2. 2
  1. X95  Overwatch Medium Length Top Rail  (for X95 Tavor)
    $104.95

    Out of stock

    The top rail on the Tavor X95 is notoriously low and designed for taller Israeli made optics. The Overwatch top rail raises the rail height up approximately 1/2" which makes the height of the X95 Tavor optics rail over the stock the exact same as that of an AR-15, and allows for comfortably mounting and using all of the standard optics and iron sights available in the AR-15 focused U.S. market. The X95 Overwatch Medium Length Top Rail rail features 21 picatinny slots and is shorter in length for those preferring a more compact and lighter setup.

    Material: 6061 aluminum 

    Finish:  Type III milspec hardcoat black anodizing

    Weight: 6.9 ounces

    Length: 9.0 inches

    100% designed and manufactured n the USA

    Learn More
  2. X95 Cantilever Forend  ( Taller Height Rail )
    $234.95

    Out of stock

    PLEASE NOTE:   THE GEN I  FOREND HAS BEEN DISCONTINUED.  IT HAS BEEN REPLACED WITH AN IMPROVED GEN II FOREND THAT MORE SECURELY MOUNTS THE FOREND TO THE TOP RAIL.  PURCHASE THE GEN II FOREND HERE:

    https://manticorearms.com/shop-by-rifle/x95-tavor-products/x95-cantilever-forend-ar-15-height-rail-gen-ii

    The Patent Pending  X95 Cantilever Forend offers a wealth of features at an incredible price.  To solve some of the inherent issues of how to securely mount a forend to the X95 without contacting the barrel we had to think outside the box, and the solution was a two part system.

    The first component consists of a 39 slot picatinny top rail and cover plate assembly that is raised to the proper height to work with standard AR-15 iron sights and optics (i.e. most all sighting components on the market these days).  In addition the top rail is cut for the 300 blackout gas adjustment access in case you are mounting on a 300 Blackout X95.

    The second component is the forend itself which is 2" longer than the OEM forend, features 3 rows of M-LOK (13 slots) on each side plus 2 QD points on each side,  and  5 slots of M-LOK on the underside.  The center row of M-LOK on the sides and the underside row on M-LOK is centered on the bore line making it much easier to zero lasers and other items that are bore line sensitive.   The top of the forend features two L-shaped tabs that engage matching slots on the top rail.  To install the forend portion just slide the forend into the slots on the top rail along the axis of the barrel, make sure the alignment tab on the underside engages the opening in the receiver,  tighten the cross bolt screw and you are ready to go with a rock solid mounted forend.  This along-the-bore-axis installation allows the additional benefit of being able to install a suppressor up to 1.5" in diameter on the barrel and the forend can easily be slid on and off without need to remove the suppressor.

    Not wanting to leave an opening where the lower plastic tab of the OEM forend engages, we have included a polymer filler block that blends perfectly with the receiver to keep everything closed up and tidy.

    One last benefit- with X95 Cantilever forend THE BARREL IS NOW FREE FLOATED.  No more contact of the barrel as with the OEM polymer forend and its two barrel mounted polymer support points, as the X95 Cantilever Forend is completely supported by the top rail and the receiver.

    Total weight of the system is 1 lb 7.4 ounces compared to the OEM 1 lb 2.5 ounces.  Only 3.9 ounces more than the OEM forend at a gain of all aluminum construction, the ability to sleeve a suppressor, a longer and higher and more useful top rail, and almost 2" of additional forend with a slimmer profile plus M-LOK compatibility and integral QD points.  Not a bad deal for 3.9 extra ounces, is it?  

    The X95 Cantilever Forend  is Patent Pending, and manufactured of 6061 black milspec hardcoated aluminum (plus a polymer filler block) 100% right here in the USA.

    Material:  6061 aluminum and polymer

    Finish:  Type III milspec hardcoat black anodizing 

    Weight:   1 lb 7.4 ounces

    Length:  For 16" and 18.5" barreled guns (2" longer than OEM forend)

    100% designed and manufactured in the USA

    Learn More
  3. X95 Curved Buttpad (for X95 Tavor)
    $72.95

    Out of stock

    PLEASE NOTE THIS BUTTPAD WILL ONLY FIT THE  X95 TAVOR AND NOT THE ORIGINAL TAVOR SAR

    Similar to our Tavor Curved Buttpad, the X95 Curved Buttpad features an aluminum skeleton structure with an overmolded rubber pad.  The rubber pad is curved to conform to the shoulder and not only give better ergonomics and grip but also shortens the overall length of pull on the rifle.  By keeping the top edge the same length as the OEM buttpad the rifle does not drop under 26" inches in length, which if shorter than that would make it an NFA Short Barreled Rifle.

    The X95 curved buttpad is made by Manticore Arms in the USA.

     Please note that Tavor Curved Buttpads and X95 Curved Buttpads ARE NOT interchangeable- each model of IWI Tavor uses its own dedicated buttpad.  Please be sure to order the correct buttpad for your rifle, and if not sure please contact customer service at info@manticorearms.com

     

    Material: 6061 aluminum and rubber like polymer

    Finish:  Black Cerakote on aluminum, black finish on rubber like polymer

    Weight: 6.5 ounces

    Length: N/A

    100% designed and manufactured in the USA

    Learn More

Grid List

Set Descending Direction

11-13 of 13

Page:
  1. 1
  2. 2